Turbo GSR; Precision 580cc injectors and Walbro 255lph fuel pump?
04-24-2014, 06:05 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2014
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Turbo GSR; Precision 580cc injectors and Walbro 255lph fuel pump?
I know injectors and fuel pumps have been covered a million times here, but since this particular topic is so dependent on the specific setup I figured I'd start a thread for my questions anyway.
Hypothetically I'm gonna boost 10psi (currently at about 5psi) and never any more. Therefore I don't want to spend unnecessarily and buy ID1000 injectors and an Aeromotive 340lph fuel pump (y'all know, for growth).
I'm hoping for about 300whp but wherever 10psi gets me it gets me. So at 10psi/300whp, will Precision 580cc injectors and a Walbro 255lph fuel pump be enough?
Thanks in advance for any help/advice/suggestions!
Hypothetically I'm gonna boost 10psi (currently at about 5psi) and never any more. Therefore I don't want to spend unnecessarily and buy ID1000 injectors and an Aeromotive 340lph fuel pump (y'all know, for growth).
I'm hoping for about 300whp but wherever 10psi gets me it gets me. So at 10psi/300whp, will Precision 580cc injectors and a Walbro 255lph fuel pump be enough?
Thanks in advance for any help/advice/suggestions!
04-24-2014, 06:58 AM
#5
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Turbo GSR; Precision 580cc injectors and Walbro 255lph fuel pump?
Yea you'll be fine. you'll hit the limit of 93 octane before you run out of fuel pump.
04-24-2014, 08:01 AM
#6
Honda-Tech Member
Join Date: Mar 2012
Location: Frederick, Maryland
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo GSR; Precision 580cc injectors and Walbro 255lph fuel pump?
I know injectors and fuel pumps have been covered a million times here, but since this particular topic is so dependent on the specific setup I figured I'd start a thread for my questions anyway.
Hypothetically I'm gonna boost 10psi (currently at about 5psi) and never any more. Therefore I don't want to spend unnecessarily and buy ID1000 injectors and an Aeromotive 340lph fuel pump (y'all know, for growth).
I'm hoping for about 300whp but wherever 10psi gets me it gets me. So at 10psi/300whp, will Precision 580cc injectors and a Walbro 255lph fuel pump be enough?
Thanks in advance for any help/advice/suggestions!
Hypothetically I'm gonna boost 10psi (currently at about 5psi) and never any more. Therefore I don't want to spend unnecessarily and buy ID1000 injectors and an Aeromotive 340lph fuel pump (y'all know, for growth).
I'm hoping for about 300whp but wherever 10psi gets me it gets me. So at 10psi/300whp, will Precision 580cc injectors and a Walbro 255lph fuel pump be enough?
Thanks in advance for any help/advice/suggestions!
Maybe, you will have to run those injectors at around 85-90% duty. Your fuel pump will be fine.
Thread
Thread Starter
Forum
Replies
Last Post
deucedeuceEK
Forced Induction
2
06-02-2007 04:33 AM