streetcartuner

im gunna be boosting my CRX with a D16A6 with a t-25 turbo from a gst and i plan on rebuilding the whole motor with new gaskits and bearings and same with the turbo
what im wondering is how much boost will it handle before it goes BOOM!!!

tegman23

Your going to have to search around a little dude....Psi really doesnt matter, turbo sizes make different power @ different psi of boost.....

Ls_dx

iTrader: (5)

And also the tune up matters. Maybe while its apart put some better stuff into it? Pin and post the block? ??

streetcartuner

AR is .48
on like 8 LBS stock internals

streetcartuner

stock eclipse gst turbo
T25 on D16A6 old school si motor
could i hear any build or any thing

AJxr

just put the turbo on. for a setup like that its not worth the $ for rebuilding. unless the motor smokes horribly.

set a 200whp goal and see how much psi it takes to make that.

92civiceg9gsr

A stock d16 will handle about 250whp at the most. 200whp is pretty safe. Tuning is the key to engine life though.

streetcartuner

ok i know their and stock boosted d16s out their its my winter project and ya theirs still snow so ya its getting rebuild