Tony1 custom turbo kit dynoed
#1
Better than steak
Thread Starter
Join Date: Jan 2000
Posts: 16,859
Likes: 0
Received 0 Likes
on
0 Posts
Tony1 custom turbo kit dynoed
Yesterday tony asked me if I come tune an FMU on the dyno.(inside joke if you noticed my title). Any how here is the set up.
-92-95 civic Si hatchback
-Stock b18c w/ skunk2 intake manifold.
-Greddy SP exhuast w/no cat.
-Stock injectors/msd fuel pump/ missing link/ and Vortech FMU
-Jotech Meng header manifold
- Spearco 24 x 11 x 3 intercooler
-Tial wastegate
-MSD Digital 6 Ignition
This is the meng header that cracked, but tony rewelded it up.
And the dyno @ .5 Bar:
Tony, call me the next time you need a FMU tuned.
art
-92-95 civic Si hatchback
-Stock b18c w/ skunk2 intake manifold.
-Greddy SP exhuast w/no cat.
-Stock injectors/msd fuel pump/ missing link/ and Vortech FMU
-Jotech Meng header manifold
- Spearco 24 x 11 x 3 intercooler
-Tial wastegate
-MSD Digital 6 Ignition
This is the meng header that cracked, but tony rewelded it up.
And the dyno @ .5 Bar:
Tony, call me the next time you need a FMU tuned.
art
#2
Re: Tony1 custom turbo kit dynoed (Arturbo)
Can you give me some more info on your turbo kit and maybe some prices,im planning on buying my pieces in the next couple of weeks.Also Some pics on your intercooler,im planning on using the same size and i need some ideas about mounting it and if i need to remove the support bar.
#5
Honda-Tech Member
Join Date: Apr 2002
Location: bay area, ca, usa
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tony1 custom turbo kit dynoed (Arturbo)
"This is the meng header that cracked, but tony rewelded it up."
does meng header easy to crack? because i think i will buy it.
does meng header easy to crack? because i think i will buy it.
#6
Re: Tony1 custom turbo kit dynoed (gsrt)
I talked tony and this is what he told me about the MENG vs the full-race mani:
The other manifold is more prone to cracking, but if you support the turbo from the bottom to the block you should be alright. The collector isn't as nice as the full-race though.
The other manifold is more prone to cracking, but if you support the turbo from the bottom to the block you should be alright. The collector isn't as nice as the full-race though.
Trending Topics
#10
Better than steak
Thread Starter
Join Date: Jan 2000
Posts: 16,859
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tony1 custom turbo kit dynoed (DeepSi)
****, tunning stand alone is not my forte.. I only tune fmu! I think if he ran a stand alone and at 10-12psi he'll get at least 335-350whp. Easy.
art
art
#14
Re: Tony1 custom turbo kit dynoed (Arturbo)
Art,
That is Crazy power in a little hatch like that maybe I should have had you fly out to des moines when I still had my fmu setup ...
By the way what kind of egt levels were you seeing full throttle of course...????
Laters,
Adi
#15
Re: Tony1 custom turbo kit dynoed (DeepSi)
you didn't say what turbo you used...what A/R...what trim??? I'm curious..but even more impressed...
I might forget aboutt eh whole standalone deal and drive down to texas and have Art install and tune my FMU
I might forget aboutt eh whole standalone deal and drive down to texas and have Art install and tune my FMU
#17
Smarter than you
iTrader: (1)
Join Date: Apr 2001
Location: Third Coast, united states
Posts: 8,240
Likes: 0
Received 2 Likes
on
2 Posts
Re: Tony1 custom turbo kit dynoed (Arturbo)
sick #'s. I am amazed. how high did u rev it too? it looks like another 500rpm's would have kept making power.
just plain sick.
just plain sick.
#18
Better than steak
Thread Starter
Join Date: Jan 2000
Posts: 16,859
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tony1 custom turbo kit dynoed (J2turbo21)
How do you tune a FMU?Thats like a vortec 12:1 something like that?
#19
Re: Tony1 custom turbo kit dynoed (Arturbo)
DAMN IT ART! when i read the title i couldnt believe jo-tech had the motor running this quick! but then i looked inside and was kinda disappointed that it was something else. talk about build up and let down, ****! good job on tunning though!
#21
Re: Tony1 custom turbo kit dynoed (Arturbo)
HEHEH ok i was just making sure,cause i aint never heard of anyone tuning an fmu.Nice thought,i was gonna go with the meng header but i want something a little bit better.Nice numbers thought.Also how much psi is .5bar,like 7.5psi something like that?
#22
Re: Tony1 custom turbo kit dynoed (J2turbo21)
hey art, you should come tune my FMU lol
those are really good numbers, hope my ls/vtec turbo w/ gsr cams/pistons can pull decent ones this spring when its in at 12-14 psi...hoping for 330-350 if im lucky...*fingers crossed*
those are really good numbers, hope my ls/vtec turbo w/ gsr cams/pistons can pull decent ones this spring when its in at 12-14 psi...hoping for 330-350 if im lucky...*fingers crossed*
#23
Honda-Tech Member
Re: Tony1 custom turbo kit dynoed (DIRep972)
sick #'s. I am amazed. how high did u rev it too? it looks like another 500rpm's would have kept making power.
just plain sick.
just plain sick.