Thank You UPS Man!!
Trending Topics
#14
Guest
Posts: n/a
Re: Thank You UPS Man!! (integra-modder)
**** tha UPS man...... Viren (b18bturbo) sent out my block, rods, pistons, VAFC, and oil pump gear last tuesday, and UPS didn't put it on a truck to come from TX to NC until like Friday......... so now i've got no wheels for NOPI, i'l just have to drive the old LS/VTEC race car i guess.....
#16
Honda-Tech Member
Join Date: Mar 2001
Location: Ft. Worth, TX
Posts: 3,650
Likes: 0
Received 0 Likes
on
0 Posts
Re: Thank You UPS Man!! (DeL B18C SoL)
It's simply amazing the money these places are charging (and people are actually paying) for on these heads. I mean, that's ONE HEAD.
Has anybody ever seen an independent dyno comparison between DPR or Portflow and a stock head? I'd be very interested to see the results.
Has anybody ever seen an independent dyno comparison between DPR or Portflow and a stock head? I'd be very interested to see the results.
#17
Honda-Tech Member
Re: Thank You UPS Man!! (mplex2000)
me too. They're both about the same prices so it would be a good shootout. So many variables though. It'd be kinda tough.
s
s
#18
Re: Thank You UPS Man!! (DeL B18C SoL)
Take 3 fresh motors and do it, let some stupid magazine like SSC or SS pay for it.
What are the parts and labor involved?
Labor & parts on the head were about $1000.
#19
Re: Thank You UPS Man!! (integra-modder)
Stage V Headwork $900:
Competition Port & Polish Deshrouded & Polished Combustion Chambers
Back-Cut Valves
Radiused Blend Seats
Three-Angle Valve Job
Hand-lapped & Vacuum-Tested Valve Seats
Cylinder Head Deburred & Blueprinted
Combustion Chambers C.C.'d
Detailed Matched Intake Manifold Fully Ported to Head
and Throttle Body
Match Port Exhaust Manifolds
Port Faces Lapped Flat (Studs removed and reinstalled)
Decks Milled & Lapped (At any amount with no additional charge)
Radiused Cut Seats
About $100 for 16 valve guides
Competition Port & Polish Deshrouded & Polished Combustion Chambers
Back-Cut Valves
Radiused Blend Seats
Three-Angle Valve Job
Hand-lapped & Vacuum-Tested Valve Seats
Cylinder Head Deburred & Blueprinted
Combustion Chambers C.C.'d
Detailed Matched Intake Manifold Fully Ported to Head
and Throttle Body
Match Port Exhaust Manifolds
Port Faces Lapped Flat (Studs removed and reinstalled)
Decks Milled & Lapped (At any amount with no additional charge)
Radiused Cut Seats
About $100 for 16 valve guides
Thread
Thread Starter
Forum
Replies
Last Post
HeyMikeyyyy
Honda / Acura
64
12-06-2004 12:06 PM
travis
Road Racing / Autocross & Time Attack
30
10-13-2004 01:39 PM
Mike M
Acura Integra Type-R
31
07-12-2001 11:03 PM