Terance's 600hp Street/Track Build
#101
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: Terance's 600hp Street/Track Build
Bought a K Tuned B series belt tensioner and a EM1 subframe with swaybar & lcas
Next up is coil packs and I promise to finish this car.
Next up is coil packs and I promise to finish this car.
#103
Re: Terance's 600hp Street/Track Build
Lmk if you need kseries coils I have some from my setup I bought some of the accel ones going past the 800hp just wanted to make sure I had slightly better spark but lmk I give them up cheap lol
#104
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: Terance's 600hp Street/Track Build
So car is back at Label One. Carlos will be getting the car running again and doing some wants because in reality I got everything I need. Right after the car is done here I'll then in turn go right to get this car tuned. Originally was going to get tuned by Kenny from turbogixxer but he got hired by speed factory in Washington which is awesome for him. I'll prefer my tuner to local so I'm looking into derf tuning. He gets a lot of hype around my area so should be a good bet. Hope I make the power and call it a day
#108
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: Terance's 600hp Street/Track Build
#111
Honda-Tech Member
#112
Honda-Tech Member
Re: Terance's 600hp Street/Track Build
#117
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: Terance's 600hp Street/Track Build
yeah sort of lol blew a whole check haha. On my way to South Carolina for 5 days hopefully when i come back the car is done...
#119
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: Terance's 600hp Street/Track Build
Car is nearing completion. Car starts perfectly and as you can see all put together. Things left to do will be full lighting for the exterior, toyo r888 235/50r15 and proper suspension but all that will be done after being dyno'd. The cut out for the hood will be powder coated. Really grateful for all the hard work Carlos has put into this build and lets hope this car never stops moving forward.
Last edited by TeranceFL; 04-05-2016 at 10:46 AM.
#123
Honda-Tech Member
#124
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: Terance's 600hp Street/Track Build
Few things done recently
Sunroof delete with aluminum and CF wrap
Right now the car is in the shop and I'm complete done with it. Carlos said it should be done by the end of the week.
Sunroof delete with aluminum and CF wrap
Right now the car is in the shop and I'm complete done with it. Carlos said it should be done by the end of the week.