t3 turbo question(s)
#1
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Springfield, MO, US
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
t3 turbo question(s)
I'm not exactly sure what all the specs on turbos in any insatance are. But I've found a t3 in good shape for a decent price.
The specs are: 50 Trim, Compresser in .42 A.R housing, 69 trim turbine w/ .48 housing
Is this a decent size for a t3 turbo? I know they're small, but I'm not looking to go big. This turbo will be used on my 94 teg, stock b18b, and I won't be pushing much past 10 psi, if that high at all.
I'm assuming a turbo this size, on an engine like mine, will spool fairly quickly and hold decently utnil my puny 6800 RPM redline?
I appreciate any help.
The specs are: 50 Trim, Compresser in .42 A.R housing, 69 trim turbine w/ .48 housing
Is this a decent size for a t3 turbo? I know they're small, but I'm not looking to go big. This turbo will be used on my 94 teg, stock b18b, and I won't be pushing much past 10 psi, if that high at all.
I'm assuming a turbo this size, on an engine like mine, will spool fairly quickly and hold decently utnil my puny 6800 RPM redline?
I appreciate any help.
#3
Junior Member
Thread Starter
Join Date: Nov 2004
Location: Springfield, MO, US
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3 turbo question(s) (drift2004)
But will it be near ideal, for my needs? Running 10 psi max, spooling fairly quickly, and holding well until the low redline? That's my biggest thing, I need it to spool quickly, but at the same time hold for a decent amount of gear.
Thread
Thread Starter
Forum
Replies
Last Post
pip9
Forced Induction
3
12-27-2003 03:51 PM