i got a buddy that is going to bring back his T3/T4 Turbonetics turbo.. and he's lost all of his downpipe bolts..

does anyone know the size, and thread pitch? i assume for the T4 exhaust side?

 

can anyone help?

 

evening bump... no one knows what bolt size, and thread pitch? come on..

 

i believe you mean studs..

ok, why not measure the holes in which the studs go threw, then after u have the diameter go to a place that sells them and match up the thread to a nut n find out that way.. If im wrong in what you want, just disregard my commments

 

the thing is this is for a freind..

my DSM T25 doesn't have studs, it has bolts.. and i assume his is the same setup since he asked for bolts.

i have many many bolts at work.. but ide hate to bring home 4-5 of EACH bolt, just to find out, its the wrong one.. thats why i asked if anyone knew what size, and thread pitch..

for example.. here is mine..





i just need to know what bolt goes in a Turbonetics T4 exhaust housing.

 

try M8x1.25

 

Yup, 8mmx1.25x20mm or 25mm long

 

Ive always used the d-series clutch to flywheel bolts. Since i have a can of them in the garage.

liam

 

yeah, Honda uses this bolt/stud size commonly, including for the exhaust and intake manifolds...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbopimp &raquo;</TD></TR><TR><TD CLASS="quote">Yup, 8mmx1.25x20mm or 25mm long</TD></TR></TABLE>

Would that be the same for an SC50 with 4-bolt exhaust housing?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanCivic2000 &raquo;</TD></TR><TR><TD CLASS="quote">

Would that be the same for an SC50 with 4-bolt exhaust housing?</TD></TR></TABLE>

I would assume so...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanCivic2000 &raquo;</TD></TR><TR><TD CLASS="quote">

Would that be the same for an SC50 with 4-bolt exhaust housing?</TD></TR></TABLE>

yes it is

 

Thanks.