I been searching here and other websites, can seem to find any good info on my turbo, I got a Turbonetics t3/t4b 50 trim 48a/r ; I wanted to know how does it flow cfm and lbs:also the HP is rated to? Any help good website info will be appreciated Thanks!!!


Modified by booscivic at 4:17 PM 4/14/2004


Modified by booscivic at 4:18 PM 4/14/2004


Modified by booscivic at 4:19 PM 4/14/2004

 

Anybody?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by booscivic &raquo;</TD></TR><TR><TD CLASS="quote">I been searching here and other websites can seem to find any good info on my turbo, I got a Turbonetics t3/t4b 57 trim 48a/r 63a/r; I wanted to know how does it flow cfm and the HP is rated to? Any help good website where I can find these info will be appreciated Thanks!!! </TD></TR></TABLE>

first off, slow down and speak english.

second, If you cant find it here.... ha, well it is here, trust me.

third, dont say "anybody?" after 18 mins, give people a chance to answer it.

just keep searching, you will find what you need.

 

those specs are contradicting eachother.

 

I have already searched, if you read the whole I have stated that. And if I'm posting a question is because I really can't find anything on it!!!

 

Anybody know what HP,cfm and lbs can this turbo push?

 

well **** man.. that happend to be the same turbo i have.. you shouldn't have problems pushing in low 300's on that and still be efficient.. on dohc vtec engine it should hp peak around 7.5-8K if you're to push it to full potential and can peak higher with lower hp as in my case 260. and max torque can be anywhere from 4.5-5K.

 

I know a kid that want 450whp out of t3/t04b turbo. Is that possible??

 

a friend of mine ran 11's in a turboed gsr hatch with a t3/t4 turbo at around 18psi i believe. not sure on the exact specs though of that turbo.

 

found a website with the compressor maps mine is the V trim anybody knows how to read this, how much hp are these turbo capable?
http://www.turbofast.com.au/FlowTO4B.html
http://www.turboneticsinc.com/...V1_V2

 

I want to know if this turbo going to be good enough for a D16Z6 with 8.8.1 comp to reach 350whp?