t3/t67 stage 3 wheel....WHP numbers??
04-20-2006, 12:19 PM
#1
Guest
Posts: n/a
t3/t67 stage 3 wheel....WHP numbers??
Anyone have any 600+whp dyno's with this turbo. I know alot of power is possible with the p-trim wheel but haven't seen many people running the stage 3 wheel. I was on the dyno this morning with a friends car and made 570whp/405wtq @ 7k rpm. From 7k -9.5k the tires wouldn't hold and just blew off. Just wondering how much more the turbo has in and if 600whp is possible 
04-20-2006, 12:26 PM
#3
Guest
Posts: n/a
Re: t3/t67 stage 3 wheel....WHP numbers?? (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">A stage 3 turbine wheel and a 67mm compressor?? who's idea was that??</TD></TR></TABLE>
lol
lol
04-20-2006, 12:41 PM
#4
Honda-Tech Member
Join Date: Apr 2003
Location: Ottawa, ON
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
I sent FR Geoff a PM about that for my D-Series, he said they tried it and had very poor results. Too much mismatch, so I settled for the FR T3/T61 with stage 3 turbine wheel. Maybe it's not so bad after all...
04-20-2006, 12:43 PM
#5
Honda-Tech Member
Join Date: Jun 2003
Location: PA, US
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/t67 stage 3 wheel....WHP numbers?? (TurboJesse)
I often wonder how my T04 69 trim wheel will work with my 67mm compressor side but have no luck finding info.
Not trying to jack the thread. Usefull link here http://www.full-race.com/artic...r.pdf
Not trying to jack the thread. Usefull link here http://www.full-race.com/artic...r.pdf
04-20-2006, 12:48 PM
#6
Guest
Posts: n/a
Re: (ELSpool)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ELSpool »</TD></TR><TR><TD CLASS="quote">I sent FR Geoff a PM about that for my D-Series, he said they tried it and had very poor results. Too much mismatch, so I settled for the FR T3/T61 with stage 3 turbine wheel. Maybe it's not so bad after all... </TD></TR></TABLE>
I wouldn't run it...i would think a p-trim would make atleast 75-100whp more at the same boost levels im at...its hard to say exactly though as we couldn't get a clean pass on the dyno
I wouldn't run it...i would think a p-trim would make atleast 75-100whp more at the same boost levels im at...its hard to say exactly though as we couldn't get a clean pass on the dyno
06-06-2006, 01:43 PM
#7
Honda-Tech Member
Join Date: Feb 2004
Location: Baltimore, MD, USA
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/t67 stage 3 wheel....WHP numbers?? (tony1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">A stage 3 turbine wheel and a 67mm compressor?? who's idea was that??</TD></TR></TABLE>
Is it possible to swap the stage 3 wheel for a p trim wheel? If so, where could you buy one?
Is it possible to swap the stage 3 wheel for a p trim wheel? If so, where could you buy one?
Trending Topics
06-09-2006, 06:43 AM
#8
Honda-Tech Member
Join Date: Feb 2004
Location: Baltimore, MD, USA
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Re: t3/t67 stage 3 wheel....WHP numbers?? (Chris99SI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chris99SI »</TD></TR><TR><TD CLASS="quote">
Is it possible to swap the stage 3 wheel for a p trim wheel? If so, where could you buy one?</TD></TR></TABLE>
Is it possible to swap the stage 3 wheel for a p trim wheel? If so, where could you buy one?</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
Nextelbuddy
Forced Induction
8
06-26-2004 05:38 AM
blkrice
Forced Induction
1
02-20-2003 07:48 PM
