t28 what flange?
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: salt lake city, Ut, USA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
t28 what flange?
I just bought a t28 turbo... It hasn't came in yet but i need a manifold.. I was wondering will the t28 fit the t3 flange that most manifolds have?
Or will i need a t25 flange?
If i cant fit it on a t3 flange is the an adaptor plate or something??
Or where can i get a manifold with a t25 flange for a d series?
Or will i need a t25 flange?
If i cant fit it on a t3 flange is the an adaptor plate or something??
Or where can i get a manifold with a t25 flange for a d series?
#3
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: salt lake city, Ut, USA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: t28 what flange? (ILLICON3000)
so a greddy will work? And does the greddy have an external flange..
And im sorry whats an adaptor plate from a HF manifold?
And im sorry whats an adaptor plate from a HF manifold?
#5
Re: t28 what flange? (Ckjeepin)
greddy manifold does not have an external gate.
He meant for HF not from. The HF manifold is a stock civic manifold that mounts the cat in front of the motor so it's really short. People make a thick steel plates that adapt the oddball HF bolt pattern to pretty much any popular turbine inlet flange. This puts the turbo pretty much where a regular turbo manifold would for under 100 bucks including the adaptor
Try bmcracing. He makes some aweome CNC adapter plates for not much money. I buy from him and am always impresed with the products. you can e-mail Sam @ BMC at this address sgoertz@sbcglobal.net for a quote on an HF to t25/28 adapter plate.
He meant for HF not from. The HF manifold is a stock civic manifold that mounts the cat in front of the motor so it's really short. People make a thick steel plates that adapt the oddball HF bolt pattern to pretty much any popular turbine inlet flange. This puts the turbo pretty much where a regular turbo manifold would for under 100 bucks including the adaptor
Try bmcracing. He makes some aweome CNC adapter plates for not much money. I buy from him and am always impresed with the products. you can e-mail Sam @ BMC at this address sgoertz@sbcglobal.net for a quote on an HF to t25/28 adapter plate.
Thread
Thread Starter
Forum
Replies
Last Post