T28 BB
#1
Thread Starter
Join Date: Mar 2005
Location: Sheffield, N/A, United Kingdom
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
T28 BB
I am considering buying a T28 ball bearing turbo kit from importperformanceparts.net. I have been told that if I run it at over 10psi I will need forged pistons, new connecting rods and a boost controller, as the kit is set at 6-7psi when shipped. Can anyone suggest any other mods that will help, or just tell me whether it sounds like a good setup? Everything else on the car is standard, apart from suspension and brakes. I have also been told to buy a new ceramic clutch. By the way the car is a 1992 Honda Civic 3dr HB 1.6 Vetec.
#2
Re: T28 BB (ChromedOut)
FYI this is a pretty noob question but I'm not too far ahead of you so I'll try my best
I would recomend that you search around first, you'll be suprised how much your planned setup will change as you learn more. I would recomend that you build your own turbo kit. With a custom turbo kit you can tailor certin pieces for your own demands. Turbo kits are expensive and..... **** just do it yourself, thats half the fun right? hit up these site for some good info
http://www.beesandgoats.com/bo...Goals
http://www.cse.uconn.edu/~yele....html
http://www.fiautosports.com/turboswork.html
http://www.homemadeturbo.com/f...28135
BTW get a GT28RS they just kick the **** out of life.
Good luck,
I would recomend that you search around first, you'll be suprised how much your planned setup will change as you learn more. I would recomend that you build your own turbo kit. With a custom turbo kit you can tailor certin pieces for your own demands. Turbo kits are expensive and..... **** just do it yourself, thats half the fun right? hit up these site for some good info
http://www.beesandgoats.com/bo...Goals
http://www.cse.uconn.edu/~yele....html
http://www.fiautosports.com/turboswork.html
http://www.homemadeturbo.com/f...28135
BTW get a GT28RS they just kick the **** out of life.
Good luck,
Thread
Thread Starter
Forum
Replies
Last Post