I need the dimensions of the T25 turbo inlet for an adapter plate. Since I dont have the turbo yet I was wondering if someone could email me or post the measurements. Any help would be gladly appriciated.
crxsi_rcr@yahoo.com

 

I have those. Try my site below.

The measurements are pretty simple, I may not have them posted though now that I think of it.

Let me look in my files.

Randy

Here they are:

The center hole inlet is 2" in diamter.
The bolts are symmetric: 1.13" from centerline and 1.547" from centerline.
The longer dimension is front and back.

HTH


[Modified by RGAZ, 12:20 PM 3/6/2002]

 

Are you absolutely possitive that those measurments are correct? Not to doubt you but I need to be 110% sure so as not to pay for a adapter plate that wont work. If you could please double check thows for me I would really appriciate it, and thank you again for the info.


[Modified by crxsi_rcr, 6:29 PM 3/6/2002]

 

y dont u just go buy the inlet gasket from a dsm dealer. simple as that.like 10 or 15 bucks and then u have the right spacing