strange vibration after replacing axle
#1
Thread Starter
Join Date: Aug 2002
Location: Dude Wheres My Avatar, ItsCold
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
strange vibration after replacing axle
i replace my cv joint with a remanufactured Fenco brand unit. after which i noticed on acceleration the car would vibrate and also my alignment is off. WTF???
the axle is in properly, i dont see how my alignment would move.
the axle is in properly, i dont see how my alignment would move.
#3
Thread Starter
Join Date: Aug 2002
Location: Dude Wheres My Avatar, ItsCold
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
how? i jacked up that wheel and shook it but didnt notice any noise, also there's a weird clunking on decelleration and acceleration. 1 clunk, not like CV joints. im stumped
#4
Thread Starter
Join Date: Aug 2002
Location: Dude Wheres My Avatar, ItsCold
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
stupid me.
the rear engine mount was loose. tightened it up. now no shimmy or steering problems.
the Clunking noise is still there. i'm stumped. possibly the ball joints.
the rear engine mount was loose. tightened it up. now no shimmy or steering problems.
the Clunking noise is still there. i'm stumped. possibly the ball joints.
Thread
Thread Starter
Forum
Replies
Last Post
GReddy SI
Honda Civic / Del Sol (1992 - 2000)
12
07-17-2003 04:07 AM