Speed Pro tunning?
04-05-2002, 05:38 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2002
Location: Crofton, Md, USA
Posts: 2,459
Likes: 0
Received 0 Likes
on
0 Posts
Speed Pro tunning?
O.k. I am about to start my car, I need help tunning in the north east tri state area.
My main concern is washing the cylinders out of my new motor.Can anyone help, I will pay I want nothing for free, but I do not want to screw anything up, suggestions please.I plan on running 20 pounds of boost I have 83 pound injectors,help,
Jason
My main concern is washing the cylinders out of my new motor.Can anyone help, I will pay I want nothing for free, but I do not want to screw anything up, suggestions please.I plan on running 20 pounds of boost I have 83 pound injectors,help,
Jason
04-05-2002, 05:46 PM
#2
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Speed Pro tunning? (littlebluecrx)
what do you need help in send me your file and i can put a base map in there for you i also need to know what your timing is set to
04-05-2002, 05:49 PM
#3
Join Date: Mar 2002
Location: Houston, Tx
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
Re: Speed Pro tunning? (littlebluecrx)
If you were in Houston I would send you to Lawrence Connley. He is the Speed Pro guy. He has a 2100hp camaro that ran 6.5 1/4 three weeks ago in Atlanta and won the event. This guy is big time. Every Grand National in his shop is Speed Pro equiped. If you want call him at 281-540-3278, he is very nice and I am sure he can give you some help. Also he tuned my friends civic with a Speed Pro Sequential, stock B16A2 with Drag III kit at 12lbs and got 332hp and 214lbs torque. He ran an 11.8 1/4 at WIC. Tell him you spoke with David!
We'll good luck!
We'll good luck!
04-05-2002, 07:42 PM
#5
Honda-Tech Member
Re: Speed Pro tunning? (littlebluecrx)
There's this guy Mark at turbotune in Greensboro, NC. He has alot os experience with speed pro and other standalones. he has extensive knowledege with gran nationals, and hondas, he just got finish tuning SiChik from clubsi. with her vortech kit, 293 whp, 179 lb/torgue, at 12 psi, stock b16, AEM EMS. http://www.turbotuneusltd.com/honda/30&46.bmp, here is his website http://www.turbotuneusltd.com/
Thread
Thread Starter
Forum
Replies
Last Post
smokin rubber
Road Racing / Autocross & Time Attack
25
02-26-2003 03:09 PM
