^same as them doc

 

Sick!
dont got anysleeper gauges but id like to get rid of my hunker boost gauge for something a little sleeker like those LCD displays!
DOC let us know if they are for sale

 

wtf is the use of gauges in your glove box ??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aallbbeerrtttttt &raquo;</TD></TR><TR><TD CLASS="quote">car show points </TD></TR></TABLE>

ah i thought sleeper implied street use, my bad

 

here's what i WAS going to put in my del sol before i sold the car to my friend:

obviously missing a couple hehe:

 

I know this thread is old, but I too wanted something other than a pillar mount with MULTIPLE gauge locations.
So this is what I came up with....


Quad-Pod (4 gauge bezel)




Dual Pod- Inner (2 gauge bezel)



Let me know what you think.

 

I like that...do they make it for an eg?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by srmofo &raquo;</TD></TR><TR><TD CLASS="quote">I like that...do they make it for an eg?</TD></TR></TABLE>

Thanks ****! lol

Ive looked into the eg application and it would be difficult because of limited surface area.- Not impossible but very challenging. So I haven't ruled it out yet. Although I have been looking into other applications.

Thanks again for the encouraging words everyone!

 

nice

 

here's mine.


I'm now using Prosport peak/warning gauges not shown in Pic

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by luv2boost &raquo;</TD></TR><TR><TD CLASS="quote">

Thanks ****! lol

Ive looked into the eg application and it would be difficult because of limited surface area.- Not impossible but very challenging. So I haven't ruled it out yet. Although I have been looking into other applications.

Thanks again for the encouraging words everyone! </TD></TR></TABLE>
so wait....you made that console? I've got 3 gauges mounted on my console right now, but they are not recessed like that...they are just in the single pod cups bolted onto the dash...kinda hard to see the stock fuel and temp gauge, but those are worthless anyways

 

any plans for the ek?

 

No need for gauges or I should say most of them..About as sleeper as its gonna get right here....

https://honda-tech.com/zerothread/2416223

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SD_Lurker &raquo;</TD></TR><TR><TD CLASS="quote">No need for gauges or I should say most of them..About as sleeper as its gonna get right here....

https://honda-tech.com/zerothread/2416223</TD></TR></TABLE>

It would have been good years ago, but it's too late in the game to be changing all my stuff again. for anyone that is looking at more than 2 gauges or whatever your looking for, you just can't beat Neptune's Tunerview.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by srmofo &raquo;</TD></TR><TR><TD CLASS="quote">
so wait....you made that console? I've got 3 gauges mounted on my console right now, but they are not recessed like that...they are just in the single pod cups bolted onto the dash...kinda hard to see the stock fuel and temp gauge, but those are worthless anyways</TD></TR></TABLE>

Yah, I made it. It was time consuming but I like the way it ended up.

Because the cups are rounded off on the back there is still great visibility of the stock fuel and temp. (More so than other "cluster bezels" available.)

 

i put mine down in the tape deck above the cup holder. still working on it though so it's not finished

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by luv2boost &raquo;</TD></TR><TR><TD CLASS="quote">

Yah, I made it. It was time consuming but I like the way it ended up.

Because the cups are rounded off on the back there is still great visibility of the stock fuel and temp. (More so than other "cluster bezels" available.)

You can still see stock gauge info.. Check pic below.
]

</TD></TR></TABLE>

where did you get the cups? cause those dont look like my black metal ones...or are they just modified

 

I'll have to dig up some old pics. I took my radio out and mounted gauge's in there. Then I use an OEM cover plate with a magnet on it to keep them hidden when not needed.

 

Here's a pic of mine

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by srmofo &raquo;</TD></TR><TR><TD CLASS="quote">

where did you get the cups? cause those dont look like my black metal ones...or are they just modified</TD></TR></TABLE>

I custom made them. Not available at your local auto parts store.
The goal for the project was to get the bezel to match the interior and not stand out like a sore thumb.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integra3586 &raquo;</TD></TR><TR><TD CLASS="quote">bringing it back to life, i would like to see more set ups, especially the guys who have their gauges in the dimmer/cruise control switch location </TD></TR></TABLE>

Not the best pic quality nor really sleeper but you get the idea:



Gauges were down the A-pillar and kept hitting my head on them when I would get out of the car. I wanted to move them but also have them somewhere where they would be easily visible while driving. Gauge bezel is Oil Press. and Wideband. Dimmer/Cruise is Boost and Water temp. Turbo timer on steering column.

 

I recently did a Dual Pod for the EK. A Tri Pod would be easy but I haven't attempted a Quad Pod for it yet.

 

The Civics have it easy for center dash mounted gauges as they have a full free 1 DIN space to fit gauges. The Integra does not, unless your willing to lose the radio. I had to have a custom bezel made out of ABS plastic to fit 3 gauges and an aftermarket radio in the stock radio slot which is 1 3/4 DIN.

I also have the gauge cluster bezel with boost and AFR. And the center dash bezel has Oil Press, EGT and Temp.

 

This is a dual gauge Clock-Pod prototype i've been working on for the DC. This one fits a 2 1/16" or 52mm gauge. Im also looking into making one for a 60mm gauge. Let me know what you guys think.

 

s2k cluster, fuel pressure/boost...wideband to the left