Sinking sleeves? (Golden Eagle please respond also)
#1
Thread Starter
Join Date: Sep 2002
Location: You wish I was..., USA
Posts: 1,341
Likes: 0
Received 0 Likes
on
0 Posts
Sinking sleeves? (Golden Eagle please respond also)
I keep hearing from different people on here that GE sleeves have a habit of sinking. Is this true? I'd like to see some pics of this. Is it a common occurance or not. If so how common? I have a block with their sleeves and this has been a concern for me lately. I'd like to speak with someone that had this happen to them also.
#4
Honda-Tech Member
Join Date: Feb 2000
Location: Milwaukee, WI
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sinking sleeves? (tzsir)
Thanks for the Noob response, but I did nothing came up.
BTW, I haven't heard anything but great stuff about GE. So if you have a problem, you better have a substantial amount of proof to point the blame on these guys. They know their ****, and they're top notch.
#6
Re: Sinking sleeves? (tzsir)
It's a rare thing however, if it does happend GE will back up their work. I had a block that has a sinking sleeve, GE took care of it. I sent the block back to them and after reviewing the block, they fixed it.
Now, I don't want to see people blaming GE for thier FLAT TIRES.
Now, I don't want to see people blaming GE for thier FLAT TIRES.
#7
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sinking sleeves? (ekb18c)
It's a rare thing however, if it does happend GE will back up their work. I had a block that has a sinking sleeve, GE took care of it. I sent the block back to them and after reviewing the block, they fixed it.
Now, I don't want to see people blaming GE for thier FLAT TIRES.
Now, I don't want to see people blaming GE for thier FLAT TIRES.
Trending Topics
#8
Re: Sinking sleeves? (b18bturbo)
As posted on TOO's website on 1-13-03:
"We here at Golden Eagle Mfg. have addressed these " problems " and have changed our mfg. process accordingly. Every block we send out now is PERFECT in everyway and will not cause any problems for the end consumer. We have a totally new way to deck the blocks and are very confident that they will be 100% everytime, I guarantee it!"
The discussion is on their tech forum.
"We here at Golden Eagle Mfg. have addressed these " problems " and have changed our mfg. process accordingly. Every block we send out now is PERFECT in everyway and will not cause any problems for the end consumer. We have a totally new way to deck the blocks and are very confident that they will be 100% everytime, I guarantee it!"
The discussion is on their tech forum.
#9
Thread
Thread Starter
Forum
Replies
Last Post
1badITR
Forced Induction
12
07-10-2002 07:32 PM
Lei Siew Long
Forced Induction
6
01-31-2002 11:45 PM