Set my turbo back to Precision for exhange
#1
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Set my turbo back to Precision for exhange
I sent back my Precision SC50 .48 for a SC34 .63
I have a stock b16, rev hard iron/tubular no a/c Manifold, full 2.5" exhaust no cat, 32x8x3.5 intercooler, and tial wategate.
I will be running 11psi.
I hope I made the right decision.
I have a stock b16, rev hard iron/tubular no a/c Manifold, full 2.5" exhaust no cat, 32x8x3.5 intercooler, and tial wategate.
I will be running 11psi.
I hope I made the right decision.
#4
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (QCKGSR)
why did you go smaller
SC50-425hp <-- Had this.
SC32-480hp
SC34-545hp <-- Traded for this.
SC44-565hp
SC60-580hp
SC51-585hp
SC52-600hp
SC53-610hp
SC54-620hp
Future modifications for my engine. Actually my next mods,
GE Sleeves 83mm
9.5:1 83mm Forged Pistons
Eagle Rods
Ti Retainers
Dual Valve Springs
Stainless steel valves
720cc injectors
#7
I am a bad person
Re: Set my turbo back to Precision for exhange (rOby)
You have to admit the customer service at precision is #1 try that at turbonetics!! they built our turbo wrong and admitted they built it wrong and still wanted to charge 400 to fix it. turbonetics
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (MotorMatrix.com)
You have to admit the customer service at precision is #1
Unbelievable service.
#12
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (C-Redrum)
My god, what a huge intercooler...You sure its not for a Supra or Skyline ? lol
#14
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (CRX SiR T)
what is Precision's website?
#15
Re: Set my turbo back to Precision for exhange (RyanAutry)
ryan, what was the turbo that rev hard sent you? SC ? ?. My turbonetics blew up so i sent it back to rev hard and they are sending me a precision turbo. Is your new precision differnt from ur old one just by lookin at it? thanks
#16
Honda-Tech Member
Thread Starter
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (turbospool)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbospool »</TD></TR><TR><TD CLASS="quote">ryan, what was the turbo that rev hard sent you? SC ? ?. My turbonetics blew up so i sent it back to rev hard and they are sending me a precision turbo. Is your new precision differnt from ur old one just by lookin at it? thanks</TD></TR></TABLE>
I was sent a Precision SC50 .60/.48 50trim turbo.
I sent it back to Precision for the SC34 .60/.63 57Trim turbo.
They use the same t3/t04e housing. But the SC34 car support more HP.
545hp vs 380hp
I was sent a Precision SC50 .60/.48 50trim turbo.
I sent it back to Precision for the SC34 .60/.63 57Trim turbo.
They use the same t3/t04e housing. But the SC34 car support more HP.
545hp vs 380hp
#18
Member
Join Date: Oct 2002
Location: phoenix, hawaii
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (RyanAutry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanAutry »</TD></TR><TR><TD CLASS="quote"><BLOCKQUOTE>quote:<HR>wh y did you go smaller<HR></BLOCKQUOTE>
Crank Horsepower:
SC50-425hp <-- Had this.
SC32-480hp
SC34-545hp <-- Traded for this.
SC44-565hp
SC60-580hp
SC51-585hp
SC52-600hp
SC53-610hp
SC54-620hp
</TD></TR></TABLE>
can someone make a list like this, but a little bigger??(more models)
also how much HP are 720cc injectors, good for?
Crank Horsepower:
SC50-425hp <-- Had this.
SC32-480hp
SC34-545hp <-- Traded for this.
SC44-565hp
SC60-580hp
SC51-585hp
SC52-600hp
SC53-610hp
SC54-620hp
</TD></TR></TABLE>
can someone make a list like this, but a little bigger??(more models)
also how much HP are 720cc injectors, good for?
#19
Re: Set my turbo back to Precision for exhange (GOLDBERG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">also how much HP are 720cc injectors, good for?</TD></TR></TABLE>
http://www.rceng.com/technical.htm
http://www.rceng.com/technical.htm
#20
Honda-Tech Member
Join Date: Aug 2002
Location: M Trizzle
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (pissedoffsol)
hey ryan, i have the same intercooler as you do, but its not as polished and clean as i'd like it... did you polish yours up?.. got any pictures?.. i don't know how i should go about polished the endtanks, but it'll look damn good let me know man.. and nice turbo
#21
big strong guy
Join Date: Feb 2002
Location: LUTZ, fl, usa
Posts: 3,455
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (JDEM1)
I was Also going to Order the SC50 (50 trim) .63 AR but Now have decided to Go with SC32 (54 trim) .63 AR For my Stock b16a2!
I also hope I am Making right Choice!
Eric
I also hope I am Making right Choice!
Eric
#22
Honda-Tech Member
Join Date: Aug 2001
Location: www.js-garage.com
Posts: 6,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (RyanAutry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanAutry »</TD></TR><TR><TD CLASS="quote">I sent back my Precision SC50 .48 for a SC34 .63
I have a stock b16, rev hard iron/tubular no a/c Manifold, full 2.5" exhaust no cat, 32x8x3.5 intercooler, and tial wategate.
I will be running 11psi.
I hope I made the right decision. </TD></TR></TABLE>
i think you made a good decision, i sent my sc44 back for a sc61
I have a stock b16, rev hard iron/tubular no a/c Manifold, full 2.5" exhaust no cat, 32x8x3.5 intercooler, and tial wategate.
I will be running 11psi.
I hope I made the right decision. </TD></TR></TABLE>
i think you made a good decision, i sent my sc44 back for a sc61
#23
Member
Join Date: Oct 2002
Location: phoenix, hawaii
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (Jordo)
wow according to that site i need 1200cc injectors for 575crank HP???????????????????????is that correct??wtfff
#24
Member
Join Date: Oct 2002
Location: phoenix, hawaii
Posts: 4,475
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (GOLDBERG)
hmm its saying for 350 crank hp i need 750cc injectors..is it just me or does this site seem a bit off? 450's will only support 210 bhp???
#25
Honda-Tech Member
Join Date: Jul 2002
Location: Dallas, Tx, USA
Posts: 1,860
Likes: 0
Received 0 Likes
on
0 Posts
Re: Set my turbo back to Precision for exhange (GOLDBERG)
that site is probably taking into account that injectors are "maxed" out at 80% so it will not tell you to run a 450 cc with a duty cycle of 95%. They keep it safe.