Howcome I don't ever here anything about RS machining on this board?? Has noone heard of them they do some dope stuff.

 

i hope this thread brings some of the guys with RS sleeves to speak up. i expect to hear some good things.

 

ya I have seen some really dope blocks that they have done, but everyone is always talking about GE and golden eagle.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turboDC2 &raquo;</TD></TR><TR><TD CLASS="quote">ya I have seen some really dope blocks that they have done, but everyone is always talking about GE and golden eagle.</TD></TR></TABLE>
I don't talk about GE all the time, well not good things at least.

 

I have a RS Machine block. Looks very good, would look better if it was in my car though.

 

hahaha what did you pay did you just get sleeves or did you get full rotating assembly.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turboDC2 &raquo;</TD></TR><TR><TD CLASS="quote">Howcome I don't ever here anything about RS machining on this board?? Has noone heard of them they do some dope stuff.</TD></TR></TABLE>

because RS is a secret!


84mm RS here..

 

That is true I don't here about hardly anyone that uses them so I'm hoping to here some good things.

 

Got the block and assembly done by them and it's holding up just fine. Good quality and pretty strong so far.

 

RS Machine does great stuff! It sucks that there sint that much praise about RS. Everyone would be surprised HOW many teams actually go through RS.

Its like the news.. good stuff hardly gets talked about and given the recognition.. but when bad news happens, its right there in the front page of newspapers and top news on TV.
So to RS...

ALL of our Exospeed race blocks go through RS Machine for all machining needs.


Modified by exospeedAMcrx at 10:18 PM 7/9/2003

 

I use RS sleeves all the time. They are on this board regularly but rarely post. Erick Aguilar and Bisi use them as well as many others. They are not a secret, it's just that they have very few problems.

 

Rs Sleeves are the **** . I had my b16 sleeved and bored out to 84mm by them and the car is running strong as ever . I recommend them a lot no problems at all very nice people.

 

RS sleeves are great we just started using them after tryin everyone else and we have tried alot of different machine shops. as a shop owner i highly recommend them to all of my customers. i use them in my own motor also.. RS

 

Awesome feed back guys, like I said i have seen alot of dope blocks from them and I know alot of race teams use there blocks. Hopefully this post will bring them alittle recognition and some extra business.

 

Does anyone have a site address for them or a email address that I could contact them by.

 

I use and recomend RS machine. I had a slight error on their part, but they have great customer service that they took care of me. The work was top notch!

 

You can get RS sleeving done through http://www.exospeed.com. They are a good source for RS sleeving and machine work. They both work closely together. Ask for Wil. Wil is awesome on the customer service/price tip, thats for damn sure.

 

I've always been a huge fan of RS's design.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turboDC2 &raquo;</TD></TR><TR><TD CLASS="quote">Howcome I don't ever here anything about RS machining on this board?? Has noone heard of them they do some dope stuff.</TD></TR></TABLE>

Funny, this is where Im sending my block, I should have posted this, cause I heard about them from Art and Rooney ... Too bad I have to ship it from NY to Cali, but in my eyes you get what you pay for.

RS =

 

Blocks looking good Arturbo Let me know what kind of numbers that thing puts down when you finish it...............

 

my rs sleeves have 9,000 miles of abuse and they still are great.....never give me any problems.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo &raquo;</TD></TR><TR><TD CLASS="quote">I use and recomend RS machine. I had a slight error on their part, but they have great customer service that they took care of me. The work was top notch!
</TD></TR></TABLE>

damn nice art mucho pros to RS and exospeed cant wait until my LS block get done by exospeed with rs sleeves

 

Nice RW's Art. Sleeve job looks good.

 

Whats thier price range compared to darton, golden eagle?

 

About $900 from Exospeed's site i belive, well they are $900 on portflow's site. Spens the extra money to get it done right.