What are the realistic 1/4 mile times with a Integra RS(B18B) With a DRAG 3 Turbo? If I do this I plan to add crower rods, spr or je pistons, crower cams, and a port and polished head (if I can find a good machine shop!). Will thoughs mods help, what kinda power would I be looking at, and at how much boost? I would like to someday acheave 300 whp with this setup, non-Vtec!!!! Is it possible?

 

well i have a ls moor lke u . i put on a drag 3 about a month ago and i for 3 pds i dynoed at 169 whp. so yeah if u build the motor nd p the boost 300 is very possible

 

My 97 Integra LS put down 255WHP at 11psi. 255WHP = About 300 Flyhwheel HP.

 

R/T ... .904
60' ... 2.391
330 ... 6.457
1/8 ... 9.589
MPH ... 80.84
1000 ... 12.225
1/4 ... 14.025
MPH ... 108.52
That's in my DRAG 3 RS sedan. On street tires, spininng 1st, 2nd and 3rd. 7 pounds boost stock motor. Power not the problem traction is.

 

The trap speed is exceptionally high.

 

i run 13.8 on street tires on my RS at 7 lbs. nice and light! looks like a type R with moldings and 4 lug bolt pattern without the wing!

 

Yeah did you do those runs using G-Tech? 108 mph is low 13 territory...Damn!

 

Ben, is that on the stock bottom end?

 

Yea that was on a stock bottom end with a DRAG Gen 2 turbo kit.

On a side note, 108mph trap speed will usually net you 12s with good traction.