REVHARD Manifold owners.. please help.
#1
New User
Thread Starter
Join Date: Sep 2001
Location: Austin, TX
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
REVHARD Manifold owners.. please help.
Ok, after I put in my Fluidyne radiator (for 98 GSR), the condensor fan
no longer fit, so I purchased a SPAL 2.05" fan. It works well...BUT
I currently have my wastegate's dumping right on top of my turbo manifold.
The exhaust gas is slowly melting the fan. To remedy this, I purchased some
aluminum tape, and taped up all the affected plastic areas of the fan..
It seems to be working well right now, but I noticed that some portions are still
slowly melting.
Besides that fact, I'm worried that the exhaust gases will eventually wear things
inside the car (when the WG is open a long time)...
THEREFORE, Just wondering what people have been doing for dumptubes?
I'm thinking of getting some cheap metal dryer hose, and routing under the car.
no longer fit, so I purchased a SPAL 2.05" fan. It works well...BUT
I currently have my wastegate's dumping right on top of my turbo manifold.
The exhaust gas is slowly melting the fan. To remedy this, I purchased some
aluminum tape, and taped up all the affected plastic areas of the fan..
It seems to be working well right now, but I noticed that some portions are still
slowly melting.
Besides that fact, I'm worried that the exhaust gases will eventually wear things
inside the car (when the WG is open a long time)...
THEREFORE, Just wondering what people have been doing for dumptubes?
I'm thinking of getting some cheap metal dryer hose, and routing under the car.
#2
Honda-Tech Member
Join Date: Jun 2000
Location: Bay Area, CA, USA
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
Re: REVHARD Manifold owners.. please help. (echo999)
I just used a flange, 1.5" ubend, and some flex pipe. Just cut and weld to route the exhaust gas out of the way. I'd go with flex pipe over dryer hose, it's not that expensive.
Brad
Brad
Thread
Thread Starter
Forum
Replies
Last Post
Charlie Moua
Forced Induction
9
05-23-2009 11:16 AM