revhard BOV
#1
revhard BOV
what does the BOV for the revhard kit ( vortech )sound like? ive heard all the name brands, but revhards, i havent.
also does the flange of revhard piping fit other two bolt BOVs? thanks, peace.
also does the flange of revhard piping fit other two bolt BOVs? thanks, peace.
#2
Moderator
iTrader: (14)
Re: revhard BOV (chihuahuamanx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chihuahuamanx »</TD></TR><TR><TD CLASS="quote">what does the BOV for the revhard kit ( vortech )sound like? ive heard all the name brands, but revhards, i havent.
also does the flange of revhard piping fit other two bolt BOVs? thanks, peace.</TD></TR></TABLE>
Sounds a lot like the Greddy S from the ones I've used, but it can vary.
They fit the Greddy Type S BOV as well.
also does the flange of revhard piping fit other two bolt BOVs? thanks, peace.</TD></TR></TABLE>
Sounds a lot like the Greddy S from the ones I've used, but it can vary.
They fit the Greddy Type S BOV as well.
#3
Honda-Tech Member
Join Date: Sep 2002
Location: Vila Velha, Brasil
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
Re: revhard BOV (TheShodan)
my sounds like this.....pssshh--psshhttt--pssshhhttt----psshhhttt---. It's not a sinlge psshhtt, but a sequence of them.
#4
Re: revhard BOV (brryder)
mine sounds like a tial 50mm. one deep woosh. No high pitched bottle rocket Type S sounds. I run a softer spring in it and the valve diameter is much bigger on the vortec than the type S so I think that would account for the sound.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brryder »</TD></TR><TR><TD CLASS="quote">my sounds like this.....pssshh--psshhttt--pssshhhttt----psshhhttt---. It's not a sinlge psshhtt, but a sequence of them. </TD></TR></TABLE>
on the car mine came off of it sounded like that. compressor surge I put a more apropiate spring for 12 psi in it and it vents clean now.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brryder »</TD></TR><TR><TD CLASS="quote">my sounds like this.....pssshh--psshhttt--pssshhhttt----psshhhttt---. It's not a sinlge psshhtt, but a sequence of them. </TD></TR></TABLE>
on the car mine came off of it sounded like that. compressor surge I put a more apropiate spring for 12 psi in it and it vents clean now.
#5
Re: revhard BOV (chihuahuamanx)
IMO the vortech BOV sounds nothing like a greddy type S if anything i would lean more towards a Tial BOV. its not very swooshy or chirpy. around 12 psi its alittle on the loud side and give a real clean sound...i dont know gotta here it urself but i would lean more towards the tial bov on sound
Thread
Thread Starter
Forum
Replies
Last Post
Ty.
Forced Induction
13
03-19-2004 01:28 AM
youngkow
Forced Induction
6
03-23-2003 12:29 PM