project 900+whp
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: MANILA, PHILIPPINES, philippines
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
project 900+whp
Civic Si Coupe
K24/K20 Turbo
Engine:
GE sleeved std bore
Wiseco Pistons
Pauter Rods
ARP head Studs
IPS Intake Manifold
75mm TB
IPS cams
Skunk2 valvetrain
Precision 1600cc injectors
Precision 825hp IC
Bullseye Power S368
Tial 44mm WG
Tial BOV
T1 Catchcan Kit
Competition Clutch Twinplate
Full Blown Dual Intank Kit
2 x Walbro 255
Earls Fuel Lines and Fittings
Aem Fuel Rail
Aem Fuel Reg
FJO Injector Driver
Hondata K-Pro
Hondata 4Bar Map Sensor
Most of the parts came from honda-tech sponsors (xenocron, b18bturbo, tony1, injected performance, ron @ ips)
2 weeks ago, i tuned the car @.8bar which made 380whp @ 95octane
last night, we pushed it to 1.5bar which made 580whp @ 100 octane
this week, we will TRY to go 40psi hopefully will make 850-900whp @ c16
K-pro is a hard thing to tune!!! but very very very versatile.
the 16 columns for map is FTL. i couldn't make it 24columns like in Smanager.
currect car pics.
oh, here's a video of last night. (i'm the guy in the passenger seat playing with the k-pro)
http://www.youtube.com/watch?v=YGK_XyItZNc
K24/K20 Turbo
Engine:
GE sleeved std bore
Wiseco Pistons
Pauter Rods
ARP head Studs
IPS Intake Manifold
75mm TB
IPS cams
Skunk2 valvetrain
Precision 1600cc injectors
Precision 825hp IC
Bullseye Power S368
Tial 44mm WG
Tial BOV
T1 Catchcan Kit
Competition Clutch Twinplate
Full Blown Dual Intank Kit
2 x Walbro 255
Earls Fuel Lines and Fittings
Aem Fuel Rail
Aem Fuel Reg
FJO Injector Driver
Hondata K-Pro
Hondata 4Bar Map Sensor
Most of the parts came from honda-tech sponsors (xenocron, b18bturbo, tony1, injected performance, ron @ ips)
2 weeks ago, i tuned the car @.8bar which made 380whp @ 95octane
last night, we pushed it to 1.5bar which made 580whp @ 100 octane
this week, we will TRY to go 40psi hopefully will make 850-900whp @ c16
K-pro is a hard thing to tune!!! but very very very versatile.
the 16 columns for map is FTL. i couldn't make it 24columns like in Smanager.
currect car pics.
oh, here's a video of last night. (i'm the guy in the passenger seat playing with the k-pro)
http://www.youtube.com/watch?v=YGK_XyItZNc
Last edited by ralph11sec; 03-15-2009 at 10:04 AM.
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: MANILA, PHILIPPINES, philippines
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Re: project 900+whp
oh no.
its a k20type-r from japan. then bought a block from b18bturbo, sent it to GE for sleeving which took like 4weeks! but its all good. then had it shipped across the pacific.
its a k20type-r from japan. then bought a block from b18bturbo, sent it to GE for sleeving which took like 4weeks! but its all good. then had it shipped across the pacific.
Trending Topics
#9
Junior Member
Join Date: Jul 2008
Location: Manila, PI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: project 900+whp
#25
Honda-Tech Member
Thread Starter
Join Date: Apr 2004
Location: MANILA, PHILIPPINES, philippines
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts