Precision SC61?
#1
Honda-Tech Member
Thread Starter
Precision SC61?
hey guys just trying to do a little more research before i choose a turbo and i was curious if anyone is running this turbo yet. Ive heard good things from Viren and i also spoke with someone at precision.
my question is when does this turbo spool by roughly on a 84 mm gsr motor 9.5to1 compression.
i mainly want something that will make 400 on pump and be streetable.
any feedback appreciated.
my question is when does this turbo spool by roughly on a 84 mm gsr motor 9.5to1 compression.
i mainly want something that will make 400 on pump and be streetable.
any feedback appreciated.
#2
Honda-Tech Member
Re: Precision SC61? (g2turbo)
I now have one, but its not on the car yet. I spoke with Jim at Precision, he was the person who assembled it.
I asked this same question. Im still using stock 81mm bore and roughly 9.5:1 compression ratio. He said it'll spool around 38-3900 rpm.
I asked this same question. Im still using stock 81mm bore and roughly 9.5:1 compression ratio. He said it'll spool around 38-3900 rpm.
Thread
Thread Starter
Forum
Replies
Last Post