Alright, it's been out for a while. I know some of you have this on your setups. What's it like?
That's the same compressor as the sc61 right? so how is it doing on your setups? and has anyone got a dyno on a stock b18c?
Thanks.

 

:evil grin:

 

Yeah I figure it's been out long enough for some crazies to have gone crazy with this on their stock blocks. Show me what I'm about to get myself into hahaha.

 

i'll keep you posted..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo &raquo;</TD></TR><TR><TD CLASS="quote">:evil grin: </TD></TR></TABLE>
GT35E = CG?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CheezeFrog &raquo;</TD></TR><TR><TD CLASS="quote">
GT35E = CG?</TD></TR></TABLE>
No...sshhhhhh!

 

Bulldogg83 should be putting it on soon . . .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AVATAR &raquo;</TD></TR><TR><TD CLASS="quote">Bulldogg83 should be putting it on soon . . . </TD></TR></TABLE>

I think he got scurred and isn't going boost the stock motor... I vote boost that biatch...!!!!

 

no one? cmon guys!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4U2NV &raquo;</TD></TR><TR><TD CLASS="quote">I think he got scurred and isn't going boost the stock motor... I vote boost that biatch...!!!!</TD></TR></TABLE>

Yeah the mangina realized that he bought a wastegaste that is like 10psi at least. . . he'll do it though. His shrine is taunting him

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AVATAR &raquo;</TD></TR><TR><TD CLASS="quote">

Yeah the mangina realized that he bought a wastegaste that is like 10psi at least. . . he'll do it though. His shrine is taunting him </TD></TR></TABLE>


LOL... It's just a spring... I'm pretty sure it can be changed..
We'll see... I hope he boosts it, cause then when the built motor comes back, we can see how much boost a stock B16 can really take...

 

 

my gt35e went on my stock gsr last week, one pass and boooooooom. Na it wasn't that bad, the motor had 125K+ on it and one of the ring lands failed during tuning. I'll post again when my new motor is in, should be a week or two now.

 

today I was talking to theshodan from team-integra.net and he suggested I would be much happier on the street with a smaller turbo than the GT35E. So I gave him the specifics of my setup and he recommended an sc44 with GT compressor and exhaust wheels for $790 so I think I'm going to go with that.

 

Pics of my GT35E and other goodies...
http://f1.pg.photos.yahoo.com/...iew=t

going to find out tomorrow how much it is going to cost me for piping and other little things and then that's when I will determine on if I am going to boost the stock block or wait to get the built one..

 

"he recommended an sc44 with GT compressor and exhaust wheels for $790 so I think I'm going to go with that."

that is not exactly right. an SC44 comes w/ a 60 trim E family wheel that is not the GT family.

 

well he recommended the sc44 but with gt wheels instead of the normal ones.

 

It's called the GT32E.... Check it out.. I also custom spec these..

 

what GT wheels are you putting in it specifically?

 

he said the 60 trim for the compressor and asked I not say the turbine

 

well if its called a GT32e then its using a GT32 turbine wheel. Not that hard to figure that out don't know why he would ask you not to say??

 

Shhhh... It's a secret...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bulldogg83 &raquo;</TD></TR><TR><TD CLASS="quote">. . . then that's when I will determine on if I am going to boost the stock block or wait to get the built one.. </TD></TR></TABLE>

*cough* VAGINA*cough*

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AVATAR &raquo;</TD></TR><TR><TD CLASS="quote">

*cough* VAGINA*cough*</TD></TR></TABLE>

please feel free to post pics of your turbo at anytime...