Precision 440 Identification help?
#1
Honda-Tech Member
Thread Starter
Precision 440 Identification help?
Alright iv had a set of supposed Precision Injectors for quite some time.
Im not sure how to identify them. But there are 2 sets of numbers on the injector.
One on the oppositie side of where the injector plug is reads 0844.
And one on the left side of the injector that reads 01D030B.
Any help would be greatly appreciated.
Im not sure how to identify them. But there are 2 sets of numbers on the injector.
One on the oppositie side of where the injector plug is reads 0844.
And one on the left side of the injector that reads 01D030B.
Any help would be greatly appreciated.
#2
Re: Precision 440 Identification help? (Vtaaak y0)
Look at the top of the injector and give us the imprinted (not scribed) numbers along the top so we can positively I.D. them for you.
#3
Honda-Tech Member
Thread Starter
Re: Precision 440 Identification help? (Rod Short)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rod Short »</TD></TR><TR><TD CLASS="quote">Look at the top of the injector and give us the imprinted (not scribed) numbers along the top so we can positively I.D. them for you.</TD></TR></TABLE>
Im not finding any of the inscribed numbers you speak of. Ill try to get pics up.
Im not finding any of the inscribed numbers you speak of. Ill try to get pics up.
#4
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Precision 440 Identification help? (Vtaaak y0)
thats the 440cc part number
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Static Flow Rate: 48.83 lb/hr @ 58.0PSI (300kPa) or 370gm/min
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Static Flow Rate: 48.83 lb/hr @ 58.0PSI (300kPa) or 370gm/min
#5
Honda-Tech Member
Thread Starter
Re: Precision 440 Identification help? (b18bturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18bturbo »</TD></TR><TR><TD CLASS="quote">thats the 440cc part number
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Static Flow Rate: 48.83 lb/hr @ 58.0PSI (300kPa) or 370gm/min </TD></TR></TABLE>
Thank you for the confirmation.
Part Number Delphi 01D030B (Lucas old 5208009, Lucas New 621031)
Static Flow Rate: 42.29 lb/hr @ 43.5PSI (300kPa) or 320gm/min
Static Flow Rate: 48.83 lb/hr @ 58.0PSI (300kPa) or 370gm/min </TD></TR></TABLE>
Thank you for the confirmation.
Thread
Thread Starter
Forum
Replies
Last Post
HybridKOOP
Forced Induction
30
10-15-2007 08:06 AM
lovey408
Forced Induction
1
09-22-2007 08:24 PM