PowerFC
#1
PowerFC
Anyone willing to share their PowerFC fuel maps for FI apps. Preferably anyone that's running 440cc injectors and 10 psi boost. PLEASE!!!
You can IM or email me at JRSCCivic98@aol.com
Thanks in advance.
You can IM or email me at JRSCCivic98@aol.com
Thanks in advance.
#2
Re: PowerFC (JRSCCivic98)
is there a qualified apexi tuner around you? if not, you can call up dynospot racing here in san jo, california at 408-271-9800. they'll help you out a lot. best tuner for the pfc around here is motorsport dynamics. look their name up on yahoo or something and get their number. located in sacramento.
#3
Honda-Tech Member
Join Date: Oct 2000
Location: Yokohama, Japan, Japan
Posts: 7,810
Likes: 0
Received 0 Likes
on
0 Posts
Re: PowerFC (JRSCCivic98)
I've got a pretty good starter map for you...you'll still need to tune it though...just shoot me some mail so that I remember to send it to you...
#4
Re: PowerFC (MiraiZ)
Yeah, I'm on the East coast in Savannah, GA. There ain't sh** here as far as speedshops or anything, and it's a 4 hour drive to Atlanta, where there is only one shop that has PowerFC experience, but that's only with the RX7 units.
Hopefully there will be something opening up here in town pretty shortly. However, if anyone out there as anything tuned up and willing to share that would be great for the time being...
Thanks again to everyone that's come forward so far.
You can't imagine how hard it is to find someone with a PowerFC to swap maps with like the Hondata guys usually do.
Anyhoo, thanks again!!
Hopefully there will be something opening up here in town pretty shortly. However, if anyone out there as anything tuned up and willing to share that would be great for the time being...
Thanks again to everyone that's come forward so far.
You can't imagine how hard it is to find someone with a PowerFC to swap maps with like the Hondata guys usually do.
Anyhoo, thanks again!!
#5
Honda-Tech Member
Join Date: Jan 2001
Location: Lancaster, PA, USA
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: PowerFC (JRSCCivic98)
if you have an Ls with a good bit of work done i have maps up to 28 psi. Email me a Booted3g@aol.com and ill send them to you. This was tuned on our dyno with my 2020cc turbo car so im not sure how close it will be.
#6
Re: PowerFC (boosted3g)
No LS, my car is a 98 Civic. It still has the D16Y8 motor in it running a JRSC at 10 psi. The motor is stock. My mods are listed in my profile if anyone is interested...
Thread
Thread Starter
Forum
Replies
Last Post