Port matched manifolds
03-06-2006, 08:46 PM
#1
Honda-Tech Member
Thread Starter
Port matched manifolds
Figured this might interest some of you so I would post it here, I have been designing a few different style manifolds that are still in the works but should be done soon. I have a few log manifolds going out soon to customers and will have pictures by the end of the week.
A few things that I dislike when I see some of the manifolds out there is flow between runners and flanges. I spent the extra money but still kept the same low price for my manifolds. I also will also have dyno runs for each one of my designs to see what kind of gains people would see from them.
Few pics, all of my flanges are port matched and my log flanges are ported out so you can see the most out of a log manifold. I will have some pictures at the end of the week of the log manifold I'm making.
A few things that I dislike when I see some of the manifolds out there is flow between runners and flanges. I spent the extra money but still kept the same low price for my manifolds. I also will also have dyno runs for each one of my designs to see what kind of gains people would see from them.
Few pics, all of my flanges are port matched and my log flanges are ported out so you can see the most out of a log manifold. I will have some pictures at the end of the week of the log manifold I'm making.
03-07-2006, 05:15 AM
#2
Honda-Tech Member
Join Date: Nov 2004
Location: cortland, ohio, usa
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Re: Port matched manifolds (90blackcrx)
thats pretty cool. when u dyno the new one will u just take a vehicle to the dyno with one of your orginal manis, dyno it, then swap in the new design and compre? is your head ported already?
03-07-2006, 08:09 AM
#4
Honda-Tech Member
Thread Starter
Re: Port matched manifolds (orion840)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by orion840 »</TD></TR><TR><TD CLASS="quote">collector looks pretty dang good
got any pics of a finished product</TD></TR></TABLE>
Later this week I will have some
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by raiden571 »</TD></TR><TR><TD CLASS="quote">thats pretty cool. when u dyno the new one will u just take a vehicle to the dyno with one of your orginal manis, dyno it, then swap in the new design and compre? is your head ported already?</TD></TR></TABLE>
Head is not ported, but all the head flanges will match stock head ports. And I will be taking the car to a dyno with a few stock, and maybe even aftermarket company manifolds.
got any pics of a finished product</TD></TR></TABLE>
Later this week I will have some
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by raiden571 »</TD></TR><TR><TD CLASS="quote">thats pretty cool. when u dyno the new one will u just take a vehicle to the dyno with one of your orginal manis, dyno it, then swap in the new design and compre? is your head ported already?</TD></TR></TABLE>
Head is not ported, but all the head flanges will match stock head ports. And I will be taking the car to a dyno with a few stock, and maybe even aftermarket company manifolds.
03-07-2006, 08:38 AM
#6
Honda-Tech Member
Join Date: Jun 2005
Location: Hagerstown/Baltimore, MD, USA
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
looks good.
any projected price in mind?
looking to turbo my EF hatch with LS motor in th enext few months and debating on what manifold to pick-up
any projected price in mind?
looking to turbo my EF hatch with LS motor in th enext few months and debating on what manifold to pick-up
03-07-2006, 10:58 AM
#7
Honda-Tech Member
Thread Starter
Re: (meseetree)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by meseetree »</TD></TR><TR><TD CLASS="quote">
any projected price in mind?
</TD></TR></TABLE>
Now I don't want this to turn into a for sale thread so IM me
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by troyk kms »</TD></TR><TR><TD CLASS="quote">Great job with the port matching. Looks awesome. Get those pics up asap. How tall are your collectors? Are you making them yourself?</TD></TR></TABLE>
I'm welding them, there pre-cut. There 4 inch, or 3 inch I think. Port matching is due to bmcrace, great guy over there.
Modified by 90blackcrx at 3:42 PM 3/7/2006
any projected price in mind?
</TD></TR></TABLE>
Now I don't want this to turn into a for sale thread so IM me
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by troyk kms »</TD></TR><TR><TD CLASS="quote">Great job with the port matching. Looks awesome. Get those pics up asap. How tall are your collectors? Are you making them yourself?</TD></TR></TABLE>
I'm welding them, there pre-cut. There 4 inch, or 3 inch I think. Port matching is due to bmcrace, great guy over there.
Modified by 90blackcrx at 3:42 PM 3/7/2006
Trending Topics
03-10-2006, 02:59 PM
#9
Honda-Tech Member
Join Date: Jun 2005
Location: Hagerstown/Baltimore, MD, USA
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
looks pretty good.
only question is, why didn't you put the flange a little more underneath?
I ask because I am curious if this mani and a turbo will fit on my b18 in my EF hatch.
worse case is I would need a half sized radiator to be able to fit it.
do you know how well it would fit?
only question is, why didn't you put the flange a little more underneath?
I ask because I am curious if this mani and a turbo will fit on my b18 in my EF hatch.
worse case is I would need a half sized radiator to be able to fit it.
do you know how well it would fit?
03-10-2006, 03:02 PM
#10
Honda-Tech Member
Thread Starter
Re: (meseetree)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by meseetree »</TD></TR><TR><TD CLASS="quote">looks pretty good.
only question is, why didn't you put the flange a little more underneath?
I ask because I am curious if this mani and a turbo will fit on my b18 in my EF hatch.
worse case is I would need a half sized radiator to be able to fit it.
do you know how well it would fit?</TD></TR></TABLE>
The customer marked where he wanted it. I just welded it, I normally would not put it there. Customers can ask where they want it, also to add the turbo flange is fully ported also.
Notice around the sides are fully polished and ported.
only question is, why didn't you put the flange a little more underneath?
I ask because I am curious if this mani and a turbo will fit on my b18 in my EF hatch.
worse case is I would need a half sized radiator to be able to fit it.
do you know how well it would fit?</TD></TR></TABLE>
The customer marked where he wanted it. I just welded it, I normally would not put it there. Customers can ask where they want it, also to add the turbo flange is fully ported also.
Notice around the sides are fully polished and ported.
03-10-2006, 03:26 PM
#11
Honda-Tech Member
Join Date: Jun 2005
Location: Hagerstown/Baltimore, MD, USA
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
very nice,
I'll have to pick one up when I get the funds and start putting together my kit. do you have flanges so you can add a 38mm external wastegate to it. I am a much bigger fan of external wastegate then internal
I'll have to pick one up when I get the funds and start putting together my kit. do you have flanges so you can add a 38mm external wastegate to it. I am a much bigger fan of external wastegate then internal
03-10-2006, 04:13 PM
#13
Honda-Tech Member
Thread Starter
Re: (boostedej1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedej1 »</TD></TR><TR><TD CLASS="quote">this seems like more of an advertisement rather than tech. if anything this should belong in the fab forum 
</TD></TR></TABLE>
I'm showing what kind of manifold a customer will be using, not trying to sell them. Would it make it better if he posted it in here ?
I also figured it would help more people in here, I know a lot of people that are relatively new to turbo setups, view this forum.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by meseetree »</TD></TR><TR><TD CLASS="quote">very nice,
I'll have to pick one up when I get the funds and start putting together my kit. do you have flanges so you can add a 38mm external wastegate to it. I am a much bigger fan of external wastegate then internal </TD></TR></TABLE>
Yeah we have that option, this customer had an internal but we have all external flanges.
</TD></TR></TABLE>I'm showing what kind of manifold a customer will be using, not trying to sell them. Would it make it better if he posted it in here ?
I also figured it would help more people in here, I know a lot of people that are relatively new to turbo setups, view this forum.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by meseetree »</TD></TR><TR><TD CLASS="quote">very nice,
I'll have to pick one up when I get the funds and start putting together my kit. do you have flanges so you can add a 38mm external wastegate to it. I am a much bigger fan of external wastegate then internal </TD></TR></TABLE>
Yeah we have that option, this customer had an internal but we have all external flanges.
Thread
Thread Starter
Forum
Replies
Last Post
Full-Race Geoff
Forced Induction
41
10-24-2002 03:41 PM