pics of turbo/manifold support
08-24-2006, 12:40 PM
#4
Thread Starter
Join Date: Jan 2006
Location: FL
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Schister66)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 »</TD></TR><TR><TD CLASS="quote">this is why the search button was created.....i dont even know what you're really asking</TD></TR></TABLE>
first of all, i did search. no pics and barely enough thoughts to create a good bracket. i already have an idea what i want to do but i wanted to see what some others have done. it's been an important topic, everyone talks about, but not much info is found. secondly, if you don't know what i'm talking, YOU should do a little searching.
first of all, i did search. no pics and barely enough thoughts to create a good bracket. i already have an idea what i want to do but i wanted to see what some others have done. it's been an important topic, everyone talks about, but not much info is found. secondly, if you don't know what i'm talking, YOU should do a little searching.
08-24-2006, 07:55 PM
#5
Honda-Tech Member
Join Date: Aug 2006
Location: Spartanburg, SC, USA
Posts: 2,826
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TypeSLO)
http://www.imagestation.com/pi...a.jpg
here you go.
http://img.photobucket.com/alb...f.jpg
and heres a front veiw.
hope this is what you were looking for. this manifold was braced to handle a 450whp setup with a sc61.
here you go.
http://img.photobucket.com/alb...f.jpg
and heres a front veiw.
hope this is what you were looking for. this manifold was braced to handle a 450whp setup with a sc61.
Trending Topics
08-24-2006, 08:33 PM
#8
Honda-Tech Member
Join Date: Aug 2006
Location: Spartanburg, SC, USA
Posts: 2,826
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TypeSLO)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeSLO »</TD></TR><TR><TD CLASS="quote">that is a pretty good idea. a suspension system. still have load from torque though don't it?</TD></TR></TABLE>
i dont know i dont know him. but he said it handled 450whp with a sc61 on it. so i believe that its a good way to go. i think it would do the trick for you.
i dont know i dont know him. but he said it handled 450whp with a sc61 on it. so i believe that its a good way to go. i think it would do the trick for you.
Thread
Thread Starter
Forum
Replies
Last Post
