Pics of my setup.
#1
Thread Starter
Join Date: Oct 2002
Location: knoxville, tn, us
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Pics of my setup.
99 Si
B16a2(stock bore)
Motor:Darton sleeves,JG pistons,Crower Rods,ITR head,ITR cams,ITR intake,JG throttle body, JG cam gears, RC 550cc injectors, DC Sports fuel rail, B+M fuel regulator,B+M oil cooler, Fluidyne radiator,Thermal R+D 3" catback.
Trans: KAAZ limited slip diff.,Clutch Masters stage 4 clutch, CM flywheel.
Electronics: Hondata p28(s-200),MSD digital 6, Blaster SS coil, Autometer gauges(air-fuel,pyrometer,boost,shift light)
Other: Racing Hart CP-035(17"),Autopower roll bar, DC Sports tower braces(F+R upper and Rear lower)
B16a2(stock bore)
Motor:Darton sleeves,JG pistons,Crower Rods,ITR head,ITR cams,ITR intake,JG throttle body, JG cam gears, RC 550cc injectors, DC Sports fuel rail, B+M fuel regulator,B+M oil cooler, Fluidyne radiator,Thermal R+D 3" catback.
Trans: KAAZ limited slip diff.,Clutch Masters stage 4 clutch, CM flywheel.
Electronics: Hondata p28(s-200),MSD digital 6, Blaster SS coil, Autometer gauges(air-fuel,pyrometer,boost,shift light)
Other: Racing Hart CP-035(17"),Autopower roll bar, DC Sports tower braces(F+R upper and Rear lower)
#3
Re: Pics of my setup. (9psiTurboSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9psiTurboSI »</TD></TR><TR><TD CLASS="quote">Looks good How much power does it make?</TD></TR></TABLE>
:drool:psi?
:drool:psi?
#4
Honda-Tech Member
Join Date: Nov 2001
Location: denver\seattle, or at sea.
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
sounds like ur headed in the right dirction. i had those same rims, but they were the konig knock off's. just my observation as a m.e. in traning... get a new exaust manifold. that type that dumps from the #1 + 2 cylnder only sucks. everything else is gravy. oh ya, ditch the stock fuel filter too, how much fuel do you think a device that was desind to last 100k will flow. (sorry, drunk right now!)
#5
Thread Starter
Join Date: Oct 2002
Location: knoxville, tn, us
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my setup. (HybridRacer)
It hasn't been tuned yet. The Hondata has only been in the car for about 300 miles.
It's only running of of the wastegate spring(9lbs.). I'm in the process of trying to sell it right now. I have a 2yr old little girl that gets all my money now. So i'm pretty broke. It runs pretty good for 9lbs. It can pull a C5 vette on just 9lbs. so i've been told.
It's only running of of the wastegate spring(9lbs.). I'm in the process of trying to sell it right now. I have a 2yr old little girl that gets all my money now. So i'm pretty broke. It runs pretty good for 9lbs. It can pull a C5 vette on just 9lbs. so i've been told.
#6
Honda-Tech Member
Join Date: Nov 2002
Location: USA
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my setup. (blue99turbo)
SWEET. That thing looks great! I like the stock look.
I now wish I wouldn't have hacked up my front bumper to fit my starion though .
Nothing a little wire mesh can't fix though hopefully.
I now wish I wouldn't have hacked up my front bumper to fit my starion though .
Nothing a little wire mesh can't fix though hopefully.
Trending Topics
#10
Thread Starter
Join Date: Oct 2002
Location: knoxville, tn, us
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my setup. (HybridcivicLS-T)
HybridcivicLS-T what's wrong with the wastegate? It's a Tial gate so it should be perfect. Or are you talking about wastegate placement?
#12
Honda-Tech Member
Re: Pics of my setup. (1bad-eg)
Looks good to bad you have to sell it. g2turbo and I just finished a similar setup for a friend. Check out how we did his FMIC
stealth
stealth
#13
Thread Starter
Join Date: Oct 2002
Location: knoxville, tn, us
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my setup. (GITWIDIT)
I thought of doing my intercooler black but I never got around to it. The GReddy was just to nice to paint. How are things up in Cincinatti? That's where I had my car built.
#14
Honda-Tech Member
Re: Pics of my setup. (blue99turbo)
Slowly getting colder every day in da natti. Who did your work up here? BTW that intercooler in the pic isn't painted, it's just tucked behind that factory black insert/grill. Trimmed out the inside to make it fit.
#15
Thread Starter
Join Date: Oct 2002
Location: knoxville, tn, us
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: Pics of my setup. (GITWIDIT)
I could tell it wasn't black, it looks just like mine from the front. I didn't have to shave to much of the grill but I did have to cut the center of the bumper support out. Basz built the motor and assembled the turbo kit.
#17
Honda-Tech Member
Re: Pics of my setup. (blue99turbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blue99turbo »</TD></TR><TR><TD CLASS="quote">Basz built the motor and assembled the turbo kit.</TD></TR></TABLE>
Right on
Right on
#19
Honda-Tech Member
Re: Pics of my setup. (blue99turbo)
Here's a few pic's of Tim's car I took Sunday on the way home from Columbus.
Sweet looking car, better in person. He recently put down 550whp at a local domestic shops dyno day.
Sweet looking car, better in person. He recently put down 550whp at a local domestic shops dyno day.
#23
Re: Pics of my setup. (Chrome Pipes)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chrome Pipes »</TD></TR><TR><TD CLASS="quote">
Is the front bumper & fenders carbon fiber? Pretty sick hatch </TD></TR></TABLE>
yep.....let me find some pics....
Is the front bumper & fenders carbon fiber? Pretty sick hatch </TD></TR></TABLE>
yep.....let me find some pics....
#25
Honda-Tech Member
Re: Pics of my setup. (Chrome Pipes)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chrome Pipes »</TD></TR><TR><TD CLASS="quote">
Is the front bumper & fenders carbon fiber? Pretty sick hatch </TD></TR></TABLE>
Yeah and the endgate outter skin is CF, FAL rear window much more. Wicked street car. He doesn't get on HT much so I don't want to post his setup without asking him first. sorry
Is the front bumper & fenders carbon fiber? Pretty sick hatch </TD></TR></TABLE>
Yeah and the endgate outter skin is CF, FAL rear window much more. Wicked street car. He doesn't get on HT much so I don't want to post his setup without asking him first. sorry