pics of my setup
Honda-Tech Member
Joined: Mar 2002
Posts: 6,093
Likes: 0
From: Anaheim, CA, USA
Re: pics of my setup (synergy004)
What I like the best about your setup is the SARD bov. I run that on my race car for the sole fact that they are rare and no one runs them......Mike
Junior Member
Joined: Dec 2000
Posts: 581
Likes: 0
From: NY, USA
Re: pics of my setup (bQQsted hybrid)
BQQsted, just another black coupe
Here are pics I shot yesterday.
Guys I give up here is the link to my pics
The links show up when I set it up but when I go back there I keep getting the famous red "X".
http://community.webshots.com/script...bumID=15536775
[Modified by Liltrix, 1:16 PM 6/19/2002]
Here are pics I shot yesterday.
Guys I give up here is the link to my pics
The links show up when I set it up but when I go back there I keep getting the famous red "X".
http://community.webshots.com/script...bumID=15536775
[Modified by Liltrix, 1:16 PM 6/19/2002]
Thread Starter
Junior Member
Joined: Nov 2000
Posts: 277
Likes: 0
From: Virginia Beach, VA, USA
Re: pics of my setup (Jason kiDD)
DLB1994: All the tuners in our area are booked due to Battle. So I won't be able to get my car tuned in time to run at battle. I'm going there to watch though 
.
Liltrix: That's a really clean ride! Our fuel setups look very similar. What are you using for management?
Once again, thanks for all the compliments! I really appreciate it!
.Liltrix: That's a really clean ride! Our fuel setups look very similar. What are you using for management?
Once again, thanks for all the compliments! I really appreciate it!
Junior Member
Joined: Dec 2000
Posts: 581
Likes: 0
From: NY, USA
Re: pics of my setup (bQQsted hybrid)
bQQsted, I am Using the new DFI gen 7 with
720cc Injectors
MSD 6AL
Custom Ported Head w/Mirror Polishing
.40 Over JE Pistons
Crower Rods
Billet Crank
XS Engineering 60-1 Turbo
All creations done by RPM NYC http://www.pmnyc.com
[Modified by Liltrix, 11:18 AM 6/19/2002]
720cc Injectors
MSD 6AL
Custom Ported Head w/Mirror Polishing
.40 Over JE Pistons
Crower Rods
Billet Crank
XS Engineering 60-1 Turbo
All creations done by RPM NYC http://www.pmnyc.com
[Modified by Liltrix, 11:18 AM 6/19/2002]
Honda-Tech Member
Joined: Sep 2002
Posts: 3,445
Likes: 0
From: Florida
Re: pics of my setup (DLB1994)
I also like to know about your fuel setup, That is a super nice car and setup of yours! here's my email address: miraflor@attbi.com Thanks. 
Honda-Tech Member
Joined: Mar 2002
Posts: 2,314
Likes: 1
From: Midwest, USA
Re: pics of my setup (B18EG6)
i hope you painted your optima because i've never seen a "back top" optima before 
if you say you cant get a quality export of the CAD image, try using a screen capture (the print screen key captures your screen and puts it on your clipboard). from there, go into a paint program and paste it as a new image, and save it with whatever compression you want. as long as it looks good on the screen, the capture should look fine.
nice car, looks great
if you say you cant get a quality export of the CAD image, try using a screen capture (the print screen key captures your screen and puts it on your clipboard). from there, go into a paint program and paste it as a new image, and save it with whatever compression you want. as long as it looks good on the screen, the capture should look fine.
nice car, looks great
Thread Starter
Junior Member
Joined: Nov 2000
Posts: 277
Likes: 0
From: Virginia Beach, VA, USA
Re: pics of my setup (RodimusRhymes)
Wow, thanks for all the replies guys! I thought this post was dead!
I never got a chance to dyno or run the car. A few months ago my car got broken into (right in front of my work) and they totally destroyed my interior. They managed to get my DVD player, EQ, digital camcorder (sitting behind the front seat because we were going to the track after work that day). They tried to "rip" the AVC-R off the steering column (but they didn't get it), basically they simply destroyed the interior.
I had an alarm but the bastards popped the hood and disconnected the battery! All this happened ato around 3:00 PM in front of a glass building! Those guys must have had some *****.
That whole thing kinda killed my interest in the car. Ever since then, the car has just been sitting in my parent's driveway collecting dust. I sold the PMS, the ignition and the injectors. I really don't know what I'm going to do with the car now. Most likely I'll just sell it as it sits and drive my old truck for now on. Fuc% theives!
Anyway, I managed to export the CAD drawing to a decent format. A lot of the image quality was lost, but at least it's readable now. If anyone has any questions about it, just let me know. http://www.pbase.com/image/7794677/original
I bought the manifold over a year ago from "Maximum Performance". I think that the manifolds now have a "Maximum Performance" stamp on it. You can find the AD in the back of any "Turbo Magazine". Here's the number: order line: 877-651-4952, info line: 702-220-5262.
keebler65: I did paint the top of the battery black, I didn't want a big yellow battery under the hood...good eye mang!
RodimusRhymes: That's just the stock civic front bumper. I cut it out for the intercooler.
HonaTek1: No it was me that was selling the car. I was selling it to get out of all my debt. I managed to fix that problem and decided to keep the car, then this happened.
[Modified by bQQsted hybrid, 11:08 AM 11/24/2002]
[Modified by bQQsted hybrid, 11:47 AM 11/24/2002]
I never got a chance to dyno or run the car. A few months ago my car got broken into (right in front of my work) and they totally destroyed my interior. They managed to get my DVD player, EQ, digital camcorder (sitting behind the front seat because we were going to the track after work that day). They tried to "rip" the AVC-R off the steering column (but they didn't get it), basically they simply destroyed the interior.
I had an alarm but the bastards popped the hood and disconnected the battery! All this happened ato around 3:00 PM in front of a glass building! Those guys must have had some *****.That whole thing kinda killed my interest in the car. Ever since then, the car has just been sitting in my parent's driveway collecting dust. I sold the PMS, the ignition and the injectors. I really don't know what I'm going to do with the car now. Most likely I'll just sell it as it sits and drive my old truck for now on. Fuc% theives!
Anyway, I managed to export the CAD drawing to a decent format. A lot of the image quality was lost, but at least it's readable now. If anyone has any questions about it, just let me know. http://www.pbase.com/image/7794677/original
I bought the manifold over a year ago from "Maximum Performance". I think that the manifolds now have a "Maximum Performance" stamp on it. You can find the AD in the back of any "Turbo Magazine". Here's the number: order line: 877-651-4952, info line: 702-220-5262.
keebler65: I did paint the top of the battery black, I didn't want a big yellow battery under the hood...good eye mang!
RodimusRhymes: That's just the stock civic front bumper. I cut it out for the intercooler.
HonaTek1: No it was me that was selling the car. I was selling it to get out of all my debt. I managed to fix that problem and decided to keep the car, then this happened.
[Modified by bQQsted hybrid, 11:08 AM 11/24/2002]
[Modified by bQQsted hybrid, 11:47 AM 11/24/2002]
Honda-Tech Member
Joined: Mar 2002
Posts: 4,546
Likes: 0
From: MD
Re: pics of my setup (bQQsted hybrid)
the link is broken..or at least not working for me... : (
Did you mention you are selling things off of the car? What else would you consider parting with?
Thanks in advance
-Sebastian
Did you mention you are selling things off of the car? What else would you consider parting with?
Thanks in advance
-Sebastian
