in this pic does the turbo on the right have ETT
#3
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: gate city, VA, usa
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Re: in this pic does the turbo on the right have ETT (TheShodan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheShodan »</TD></TR><TR><TD CLASS="quote">Side view is needed. not a top angle. From what it can be seen so far, the turbo on the right is not an ETT, but another angle is needed to be sure.</TD></TR></TABLE>
heres a side view
heres a side view
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: gate city, VA, usa
Posts: 887
Likes: 0
Received 0 Likes
on
0 Posts
Re: in this pic does the turbo on the right have ETT (spoolin turbo s)
http://forums.nasioc.com/forum...89907
just trying to figure out the difference between the regular 35r vs the hta 35r and this page has a lot of info and pictures comparing the 2
just trying to figure out the difference between the regular 35r vs the hta 35r and this page has a lot of info and pictures comparing the 2
#5
Honda-Tech Member
from what i have seen from a DSM buddy who has an HTA35R its a billet cut compressor wheel to bushcurs design or specs or something like that, comes in T3 housings as well as DSM housings, and has a pressed in antisurge inlet instead of the 4inch "S" housing
Thread
Thread Starter
Forum
Replies
Last Post
RACEPAK
Welding / Fabrication
11
12-26-2006 05:59 AM