once again...is crank balancing required to my specs?
07-09-2008, 03:34 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2006
Location: appleton, wi, us
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
once again...is crank balancing required to my specs?
hey, guys...ive searched on crank/rotating assembly balancing, but have yet to find the answere im looking for. i have a b16a2 and will be adding golden eagle h beam rods, with cp pistons, now ive come to the conclusion that i probally wont need the crank balanced, but what about the whole assembly. i will be keeping the stock 8k redline and doubt ill take it to that point (banging of the limiter time and time again). just a thought, once oil is moving around, isnt everything out of balance anyway? thanks!!
07-09-2008, 03:59 PM
#2
Honda-Tech Member
Join Date: Sep 2003
Location: Austin, Republic of Texas
Posts: 3,234
Likes: 0
Received 0 Likes
on
0 Posts
Re: once again...is crank balancing required to my specs? (civicboy96)
I always have the machine shop that is doing the assembly balance the entire rotating assembly.
07-10-2008, 12:00 AM
#3
Honda-Tech Member
Join Date: Sep 2002
Location: Florida
Posts: 3,445
Likes: 0
Received 0 Likes
on
0 Posts
Re: once again...is crank balancing required to my specs? (civicboy96)
they are pretty much balance from the factory. I just sent mine to get it balance and they came back dead on w/o drilling or modifying.
Thread
Thread Starter
Forum
Replies
Last Post