oil feed problem with 60-1

Reply Subscribe

Thread Tools

Search this Thread

07-18-2004, 03:14 PM

herde1724

Junior Member

Thread Starter

Join Date: Oct 2003

Location: Harrison, OH, USA

Posts: 327

Likes: 0

Received 0 Likes on 0 Posts

oil feed problem with 60-1

i have a garrett 60-1 obviously u use a flange on the drain side but on my feed the hole is not threaded.........there are three holes on top in a row the one in the middle being the oil passage and i am just wondering how people got around this i am afraid to tap it due to the shavings going into the inside of the turbo

Reply Like

07-18-2004, 03:16 PM

hulkhb

Member

Join Date: Apr 2002

Location: 253, usa

Posts: 2,154

Likes: 0

Received 0 Likes on 0 Posts

Re: oil feed problem with 60-1 (herde1724)

there is a feed inlet flange that you can buy. not sure where off hand though

Reply Like

07-18-2004, 03:31 PM

herde1724

Junior Member

Thread Starter

Join Date: Oct 2003

Location: Harrison, OH, USA

Posts: 327

Likes: 0

Received 0 Likes on 0 Posts

Re: oil feed problem with 60-1 (hulkhb)

if u could find that out that would be great
thanx

Reply Like

07-18-2004, 03:54 PM

wade

Honda-Tech Member

iTrader: (1)

Join Date: Mar 2003

Location: Louisville, KY, USA

Posts: 3,662

Likes: 0

Received 0 Likes on 0 Posts

Re: oil feed problem with 60-1 (herde1724)

herde, that line u said sounds like a quote off of OFFICE SPACE from Lumberg.

I want ur turbo. what setup?

well u need to go to fast turbo or call other turbo distributors and ask if they carry a t3-60/1 feed flange! itll have 2 screws that thread itnto the turbo on the 2 ends and the middle hole on the flange will be threaded 1/8NPT