O-RING PROBLEM PLEASE HELP
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: POMPANO BEACH, FL, broward
Posts: 833
Likes: 0
Received 0 Likes
on
0 Posts
O-RING PROBLEM PLEASE HELP
well when i had this block shipped it seems that it got damaged by ups or something but the o rings were extremly uneven...we tryed to still install the headgasket and put on the head..after we did this we performed a leak down test but cylinder number 2 and 3 are leaking.Obviously its due to the o ring and now i need to replace them..does ne body know what gage they are..i know 18 is to big so im guessing its 20 but am wondering if ne one here know..thank you
ps:there aebs sleeves 84 mm
ps:there aebs sleeves 84 mm
Thread
Thread Starter
Forum
Replies
Last Post
dlric
Tech / Misc
5
02-12-2004 06:07 AM
Bucket
All Motor / Naturally Aspirated
10
07-01-2003 06:09 AM