Not Honda related, but some new toys going on my Supra
09-01-2005, 04:56 AM
#1
Honda-Tech Member
Thread Starter
Not Honda related, but some new toys going on my Supra
Special thanks to Andrea at Boosted-Hybrid for getting me this turbo quickly.
Boostfed gave me an awesome deall on the Wastegate too.
I had the manifold custom made from a member on Supraforums.
Should be a pretty decent little street set up
Boostfed gave me an awesome deall on the Wastegate too.
I had the manifold custom made from a member on Supraforums.
Should be a pretty decent little street set up
09-01-2005, 05:01 AM
#2
at the jetties fishin'
Re: Not Honda related, but some new toys going on my Supra (itr206)
ooo bling bling.
is that a master power turbo?
what size wg is that? 50mm??
oh hey I see divided tang too. you ought to try out that little block off plate thing some of the guys on turbomustangs.com are goofing around with to get quicker spool from the turbo...though it will increase your backpressure
is that a master power turbo?
what size wg is that? 50mm??
oh hey I see divided tang too. you ought to try out that little block off plate thing some of the guys on turbomustangs.com are goofing around with to get quicker spool from the turbo...though it will increase your backpressure
09-01-2005, 05:05 AM
#3
Honda-Tech Member
Thread Starter
Re: Not Honda related, but some new toys going on my Supra (stackz)
No its a Garret 61mm. Full T4
I think they also refer to it as the blowzilla.
I never heard of blocking off one of the ports. But it doesnt sound like something Ill need. Its a small turbo. Spool shouldnt be an issue at all.
Thw WG is a 44mm
I think they also refer to it as the blowzilla.
I never heard of blocking off one of the ports. But it doesnt sound like something Ill need. Its a small turbo. Spool shouldnt be an issue at all.
Thw WG is a 44mm
09-01-2005, 05:09 AM
#4
at the jetties fishin'
Re: Not Honda related, but some new toys going on my Supra (itr206)
ahh ok. yeah, I've heard of the blowzilla before just that compressor housing looked a lot like the MP housings I've seen so I was curious.
oh and here's the link to that thread I was talking about.
http://www.turbomustangs.com/f...spool
pretty interesting but the increases in backpressure they're talking about kinda has me hesitant with it as an option
oh and here's the link to that thread I was talking about.
http://www.turbomustangs.com/f...spool
pretty interesting but the increases in backpressure they're talking about kinda has me hesitant with it as an option
09-01-2005, 05:21 AM
#5
dont u dare to block a passage for the turbo
thats just dumb as **** and asking to break it
the turbo already has the divided housing for that same reason, to make it spool faster
thats just dumb as **** and asking to break it
the turbo already has the divided housing for that same reason, to make it spool faster
09-01-2005, 06:08 AM
#7
Honda-Tech Member
Re: (itr206)
There's no need to block a port since the manifold is somewhat setup for a divided housing.
If you know somebody who is looking for a 2JZ turbo kit I have access to an HKS GT3040 kit.
If you know somebody who is looking for a 2JZ turbo kit I have access to an HKS GT3040 kit.
Trending Topics
09-01-2005, 06:29 AM
#8
Honda-Tech Member
Thread Starter
Re: (Dee)
It is exactly set up for a divided turbo. I guess that normal with a 6cyl with the way the collectors will work for the extra tubes for the extra cylinders?
I dunno. Im far frm a fabricator. lol
I just know its normal to have divided on a Supra.
Ill ask around Dee.Post on Supraforums. Someone will grip it up im sure
I dunno. Im far frm a fabricator. lol
I just know its normal to have divided on a Supra.
Ill ask around Dee.Post on Supraforums. Someone will grip it up im sure
09-01-2005, 07:46 AM
#11
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Not Honda related, but some new toys going on my Supra (stackz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stackz »</TD></TR><TR><TD CLASS="quote">ooo bling bling.
is that a master power turbo?
what size wg is that? 50mm??
oh hey I see divided tang too. you ought to try out that little block off plate thing some of the guys on turbomustangs.com are goofing around with to get quicker spool from the turbo...though it will increase your backpressure </TD></TR></TABLE>
thats noly for the mustang guys that dont know how to use a pulse divided manifold and buy divided tang turbos to use on non divided flanges
is that a master power turbo?
what size wg is that? 50mm??
oh hey I see divided tang too. you ought to try out that little block off plate thing some of the guys on turbomustangs.com are goofing around with to get quicker spool from the turbo...though it will increase your backpressure
</TD></TR></TABLE>thats noly for the mustang guys that dont know how to use a pulse divided manifold and buy divided tang turbos to use on non divided flanges
09-01-2005, 07:46 AM
#12
Honda-Tech Member
Join Date: Sep 2003
Location: Easton, PA
Posts: 1,171
Likes: 0
Received 0 Likes
on
0 Posts
Re: Not Honda related, but some new toys going on my Supra (itr206)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr206 »</TD></TR><TR><TD CLASS="quote">Special thanks to Andrea at Boosted-Hybrid for getting me this turbo quickly.
</TD></TR></TABLE>
Glad to see the turbo made it there safe!
Now just let me know when you are ready for the Power FC
</TD></TR></TABLE>Glad to see the turbo made it there safe!
Now just let me know when you are ready for the Power FC
09-01-2005, 08:29 AM
#13
Honda-Tech Member
Thread Starter
Re: Not Honda related, but some new toys going on my Supra (Andrea)
Thanks again Andrea. Hopefully sooner then later. I gotta let my funds recoop.
Kim found out. lol
She said WTF did you buy now. I picked up my box quick and said wedding stuff and ran in the garage. lol
Kim found out. lol
She said WTF did you buy now. I picked up my box quick and said wedding stuff and ran in the garage. lol
09-01-2005, 09:19 AM
#15
iTrader: (1)
Join Date: Nov 2001
Location: 43257 Osgood Rd. Fremont, CA 94539
Posts: 45,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: (93turbo16)
r u sure the guy on the forums made that ? ..... cuz ssautoshit makes a design like that ....
lil eye candy for you sir .
another supra i did. your body style .. with a built 7mGTE motor
http://spoolinperformance.com/redzone/RZ-supra/
lil eye candy for you sir .
another supra i did. your body style .. with a built 7mGTE motor
http://spoolinperformance.com/redzone/RZ-supra/
09-01-2005, 09:28 AM
#16
Honda-Tech Member
Thread Starter
Re: (project dc2)
Cmon you know me better that that dont you?
Yes he made it from a direct copy from his. He made his copy originally from a BL manifold, which is a direct copy of a trust manifold. SSAC copie's the same manifold.
Kinda like the Ramhorn style for Hondas, Everybody dupes it.
This is full 321SS , thicker then SSAC , cuz I have felt them in hand before.
He told me all about his welding process and stuff and put the WG flange on there that I wanted and such.
He is a trustworthy dude. He got a Bl kit frm an MKIV and made a manifold to fit the 1J duplicating that style and used the rest of the stuff from the kit for his car.
Yes he made it from a direct copy from his. He made his copy originally from a BL manifold, which is a direct copy of a trust manifold. SSAC copie's the same manifold.
Kinda like the Ramhorn style for Hondas, Everybody dupes it.
This is full 321SS , thicker then SSAC , cuz I have felt them in hand before.
He told me all about his welding process and stuff and put the WG flange on there that I wanted and such.
He is a trustworthy dude. He got a Bl kit frm an MKIV and made a manifold to fit the 1J duplicating that style and used the rest of the stuff from the kit for his car.
09-01-2005, 10:14 AM
#19
Honda-Tech Member
Thread Starter
Re: (project dc2)
i looked on SS Autoshits site and they dont even have anything for the 1JZ anyway.
I know there is some dude from Taiwan that makes a close copy, but this dude wouldnt rip me off.
Nice pics though.
Thanks for the props guys
I know there is some dude from Taiwan that makes a close copy, but this dude wouldnt rip me off.
Nice pics though.
Thanks for the props guys
09-01-2005, 10:23 AM
#20
Honda-Tech Member
Join Date: Oct 2003
Location: Murray, UT, Us
Posts: 1,740
Likes: 0
Received 0 Likes
on
0 Posts
Re: Not Honda related, but some new toys going on my Supra (itr206)
cant wait to see it on, i think my next car is gonna be a supra. well i can dream haha.
09-01-2005, 10:32 AM
#21
Honda-Tech Member
Thread Starter
Re: Not Honda related, but some new toys going on my Supra (stockredej1)
Well its not the Supra everyone invisions. Its an MKIII with a JZ swap.
I had a deal going with an MKIV recently too and decided to hold off until this one was done. I cant have too many projects. Ill go even more nuts than I already am.
I will have both in my stable in due time.
Thanks again for the kind words though. I am gonna wait a little to put it all on. I wanna get track times in the next few weeks and some dyno time to see where it sits before taking her apart again
I only have a few hundred miles on the swap. lol.
I get sick of things easy.
The twins are mad fun though, but power is very important to me
I had a deal going with an MKIV recently too and decided to hold off until this one was done. I cant have too many projects. Ill go even more nuts than I already am.
I will have both in my stable in due time.
Thanks again for the kind words though. I am gonna wait a little to put it all on. I wanna get track times in the next few weeks and some dyno time to see where it sits before taking her apart again
I only have a few hundred miles on the swap. lol.
I get sick of things easy.
The twins are mad fun though, but power is very important to me
09-06-2005, 09:44 PM
#23
Honda-Tech Member
Re: (project dc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 »</TD></TR><TR><TD CLASS="quote">yea the 2jZ-GE uses a boost logic manifold
the 7m uses SSautoshit . </TD></TR></TABLE>
And we're gonna be running the first Full-Race 2JZ-GE manifold in due time
Pete, I cant see **** cause of all the damn viruses on my comp, but sound like your gonna have some fun with that thing. When you gonna stop by the shop and show us?
the 7m uses SSautoshit . </TD></TR></TABLE>
And we're gonna be running the first Full-Race 2JZ-GE manifold in due time
Pete, I cant see **** cause of all the damn viruses on my comp, but sound like your gonna have some fun with that thing. When you gonna stop by the shop and show us?
09-06-2005, 09:49 PM
#24
Honda-Tech Member
Re: (project dc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 »</TD></TR><TR><TD CLASS="quote"> r u sure the guy on the forums made that ? ..... cuz ssautoshit makes a design like that ....
</TD></TR></TABLE>
lol looked like ssauto to me at first too. As long as it isn't you should be good
</TD></TR></TABLE>
lol looked like ssauto to me at first too. As long as it isn't you should be good
09-08-2005, 04:41 AM
#25
Honda-Tech Member
Thread Starter
Re: Not Honda related, but some new toys going on my Supra (Slick GS-R)
full pics of the car can be found here
http://pm-performance.com/Pete's%20Supra%20Page.htm
Modified by itr206 at 9:17 AM 9/8/2005
http://pm-performance.com/Pete's%20Supra%20Page.htm
Modified by itr206 at 9:17 AM 9/8/2005