no more all nos car!
#1
Thread Starter
Join Date: Sep 2004
Location: Plantation, FL, USA
Posts: 1,304
Likes: 0
Received 0 Likes
on
0 Posts
no more all nos car!
im going to be retiring my nos setup after this upcoming nopi event at moroso. i came upon a great deal on a turbo, manifold, waste gate and a few other parts.
62-1 turbo, rev hard manifold, tial 40mm gate....
im going to swap out my 84mm 13 to 1 weisco's for some cp 9 to 1
slap on the turbo kit and get the car tuned. going to keep the spray on there, just going to turn it down quite a bit. i figure on 20+ psi and spray it should run good.
best time with current set up is 11.1@125 hopefully i'll get it down into the 10's before i take it apart. i'll post some pics up this week.
62-1 turbo, rev hard manifold, tial 40mm gate....
im going to swap out my 84mm 13 to 1 weisco's for some cp 9 to 1
slap on the turbo kit and get the car tuned. going to keep the spray on there, just going to turn it down quite a bit. i figure on 20+ psi and spray it should run good.
best time with current set up is 11.1@125 hopefully i'll get it down into the 10's before i take it apart. i'll post some pics up this week.
#3
Thread Starter
Join Date: Sep 2004
Location: Plantation, FL, USA
Posts: 1,304
Likes: 0
Received 0 Likes
on
0 Posts
Re: no more all nos car! (ProjectDarkBlack)
https://honda-tech.com/zerothread?id=1215880
first shows my setup when i went 11.50@119
current set up is 84mm gsr, type r head ported with flat valves, 13 to 1 wiesco pistons, etc...
first shows my setup when i went 11.50@119
current set up is 84mm gsr, type r head ported with flat valves, 13 to 1 wiesco pistons, etc...
Thread
Thread Starter
Forum
Replies
Last Post
mtlmotorsport
Forced Induction
1
11-09-2008 11:28 PM
rustyButFast
Forced Induction
16
03-04-2007 09:26 AM