newbie here with a newbie question i think??
#1
Thread Starter
Join Date: Jan 2005
Location: ST.PETERSBURG, florida, usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
newbie here with a newbie question i think??
hey folks i've been reading this site for a while now and finally got around to signing up, anyway last night myself and a friend finally boosted my d16z6
currently i'm using a "GReddy Hybrid kit". After we installed everyting we started the car and took it for a test run now boost....well i got maybe 1psi...we check all the piping,wastegate and bov just to see if there was a leak somewhere there was none... after all of that i notice that the turbo was making noise and the "cold side" of the turbo was scraping the houseing,on top of that there was not nut holding the turbo in place....anyone with a TD04H(15g) knows what i'm talking about....my question is would that kind play cause the turbo to not build boost???
also when i floor it I can maybe get 2psi.
Thanks For All The Help.
currently i'm using a "GReddy Hybrid kit". After we installed everyting we started the car and took it for a test run now boost....well i got maybe 1psi...we check all the piping,wastegate and bov just to see if there was a leak somewhere there was none... after all of that i notice that the turbo was making noise and the "cold side" of the turbo was scraping the houseing,on top of that there was not nut holding the turbo in place....anyone with a TD04H(15g) knows what i'm talking about....my question is would that kind play cause the turbo to not build boost???
also when i floor it I can maybe get 2psi.
Thanks For All The Help.
#3
Thread Starter
Join Date: Jan 2005
Location: ST.PETERSBURG, florida, usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: newbie here with a newbie question i think?? (maxspeedhonda)
hmmm.... this sucks...is there anything i can do to fix this or should i get a new turbo?? i was just rebuilt "or so i was told" can i just have the center section replaced???
#5
Honda-Tech Member
Join Date: May 2003
Location: Portland, Oregon
Posts: 5,735
Likes: 0
Received 0 Likes
on
0 Posts
Re: newbie here with a newbie question i think?? (wantboost)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost »</TD></TR><TR><TD CLASS="quote">turbo = fucked</TD></TR></TABLE>
Yeah... if your blades are moving enough to touch the side of the housing...
You're gonna need a rebuild or a different turbo... that suxors...
Yeah... if your blades are moving enough to touch the side of the housing...
You're gonna need a rebuild or a different turbo... that suxors...
#6
Thread Starter
Join Date: Jan 2005
Location: ST.PETERSBURG, florida, usa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: newbie here with a newbie question i think?? (EJ1 wilcox)
well i talked to a shop that repairs turbos and the guys has about 4 or 5 greddy turbos laying around he said that he can rebuild it for me so i think i'll just have it rebuilt......thanks for all the help guys.
#7
Member
Join Date: Mar 2004
Location: Jensen Beach, FL, 34997
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
Re: newbie here with a newbie question i think?? (Redhatchsi1.6)
yeah I seriously doubt that the turbo you bought was really rebuilt like your were told. If it was, then that person has no f-in clue what they are doing.
Thread
Thread Starter
Forum
Replies
Last Post
idontcare
Forced Induction
3
07-28-2003 02:19 PM