Needing Opinions
#1
Thread Starter
Join Date: Nov 2007
Location: Auckland, New Zealand
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Needing Opinions
I have searched thoroughly upon the topic and have yet to find a difintive answer.... However the majority of opinions tell me not boost my stock block h22a as it will blow. Then there is an example of the 530whp stock h22a which lasted 100 passes and 100 dyno pulls. ( allthough i will not be trying this ).
Just needed opinions on wether this setup will hold for atleast a year or so on 8-10 psi
H22a
Closed deck Stock Block
83000 kms
Rebuilt with oem parts ( gaskets, mains, big ends, blah blah)
Port n Polished Head
Blox cam package (hsl camshaft)
Skunk2 IM/ TB (70mm)
500cc
AEM Fuel Rail/FPR/filter
Peakboost topmount exhaust manifold
t3/t4
Tial 38mm WG
HKS Super Sequential
3" Downpipe
3" Straight through Exhaust ( undertank )
Tuned to 10 Psi
Using either:
Link
Hondata s300
Haltech
Microtech
Fill me in on what you guys think and where i could change the setup to gain longer life ( only need it for a year as i will be building a forged h22a motor as soon as this one is done and i expect the forged h22a to take atleast a year.
Just needed opinions on wether this setup will hold for atleast a year or so on 8-10 psi
H22a
Closed deck Stock Block
83000 kms
Rebuilt with oem parts ( gaskets, mains, big ends, blah blah)
Port n Polished Head
Blox cam package (hsl camshaft)
Skunk2 IM/ TB (70mm)
500cc
AEM Fuel Rail/FPR/filter
Peakboost topmount exhaust manifold
t3/t4
Tial 38mm WG
HKS Super Sequential
3" Downpipe
3" Straight through Exhaust ( undertank )
Tuned to 10 Psi
Using either:
Link
Hondata s300
Haltech
Microtech
Fill me in on what you guys think and where i could change the setup to gain longer life ( only need it for a year as i will be building a forged h22a motor as soon as this one is done and i expect the forged h22a to take atleast a year.
Thread
Thread Starter
Forum
Replies
Last Post
coomplife05
Honda Prelude
1
03-17-2012 09:40 AM