need help with rpm/ tach signal for gauge
09-02-2008, 07:11 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: chillin in that city called queen creek, but homes the atl
Posts: 3,518
Likes: 0
Received 0 Likes
on
0 Posts
need help with rpm/ tach signal for gauge
ok heres the problem all of a sudden my rpm gauge on the cluster is acting like it can't get an accurate rpm measure. but my hondata s300 is showing the rpms fine on my laptop and my timing gun is getting the rpm signal w/ no problem, and my vafc thats only hooked up to tps and rpms is getting the signal with no problem. now when the car is at idle it shows 0 on the cluster but if i give it some gas to about 3000 rpms then it reads accurate, but if i give it gas to about 2000 rpms(according to the vafc, hondata and timing light) the cluster reads 1400-1500 rpms
09-03-2008, 12:37 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Oct 2002
Location: chillin in that city called queen creek, but homes the atl
Posts: 3,518
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help with rpm/ tach signal for gauge (street dreams)
bump for anybody that can offer some real help
Thread
Thread Starter
Forum
Replies
Last Post
street dreams
All Motor / Naturally Aspirated
1
09-02-2008 07:10 PM
b20vtech
All Motor / Naturally Aspirated
3
01-12-2006 04:50 PM
