Need a Basemap for my setup
#1
Need a Basemap for my setup
hi
sorry for my english but i am from germany.
here is my setup:
Turbo from a Nissan 200sx s13(i dont know the name in usa for this car)
450ccm injectors
complete rebuild engine, d16z6, stock MAP sensor
stock fuelpump.
i need a basemap for uberdata 1.66 for the kit. i dont have a wideband so i must drive this car a few miles to a dyno for finally tune so i need a basemap that works.
Modified by d16z6GERMANY at 2:38 PM 3/9/2006
sorry for my english but i am from germany.
here is my setup:
Turbo from a Nissan 200sx s13(i dont know the name in usa for this car)
450ccm injectors
complete rebuild engine, d16z6, stock MAP sensor
stock fuelpump.
i need a basemap for uberdata 1.66 for the kit. i dont have a wideband so i must drive this car a few miles to a dyno for finally tune so i need a basemap that works.
Modified by d16z6GERMANY at 2:38 PM 3/9/2006
#3
Re: (93turbo16)
i have all the soft and hardware i need. i need only the .bin file. i dont know how much boost give this turbo but it is an stock nissan s13 turbo.
must i change the map sensor or is the original fine for this turbo ?
it is an p28 ecu
must i change the map sensor or is the original fine for this turbo ?
it is an p28 ecu
#4
Re: (d16z6GERMANY)
update:
now i become in a few days a wideband oxigen sensor with display but i dont know from what i start. i need a basemap.
the turbo is from a s13 nissan, he puts 12psi out...
now i become in a few days a wideband oxigen sensor with display but i dont know from what i start. i need a basemap.
the turbo is from a s13 nissan, he puts 12psi out...
Thread
Thread Starter
Forum
Replies
Last Post
lildelslow
Forced Induction
8
01-27-2008 02:07 PM