My B18C1 Engine Build/Assembly
#252
No-Traction = Fun
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Location: Follow Me on "InstaGram"
Posts: 2,679
Likes: 0
Received 3 Likes
on
3 Posts
Re: My B18C1 Engine Build/Assembly
Yeah!! atleast now I can drive it around and break it in and be checking for leaks and what not. I already found a tiny one on the back of the block where the oil feed and sensor is connected. Im fixing it as I type
#255
No-Traction = Fun
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Location: Follow Me on "InstaGram"
Posts: 2,679
Likes: 0
Received 3 Likes
on
3 Posts
Re: My B18C1 Engine Build/Assembly
Here you go ---> https://honda-tech.com/forums/members/luv2boost-999376842/
#257
Honda-Tech Member
Re: My B18C1 Engine Build/Assembly
Good stuff ! ! ! Try raising the idle upto 1200rpm and adding 25% duty cycle to the idle control valve. That should smooth it out a bit. You can + or - some ignition in the idle area of the map to.
#258
Honda-Tech Member
Join Date: Apr 2007
Location: boostland
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
Re: My B18C1 Engine Build/Assembly
I called up and spoke to Bo at AEM and we went thru and recalibrated a few things on the AEM EMS. It will get me by and allow me to put put just around town to put some miles on it before I go in for tunning in 2 weeks. And the moment you have all been waiting for.
http://www.youtube.com/watch?v=6pATNSFxcZo
http://www.youtube.com/watch?v=6pATNSFxcZo
#260
Honda-Tech Member
Re: My B18C1 Engine Build/Assembly
WOOOO! Just look at all those gauges light up ha, hope none of your friends have epilepsy..
Looking good though, great work on the car. Now throw it on them rollers!
Looking good though, great work on the car. Now throw it on them rollers!
#264
Re: My B18C1 Engine Build/Assembly
1 b18c with cracked sleaves(sending to GE), 2 ls block for ls/v one actual built with b16 ish piston's and ls rods with arp bolts I just havent had the time to put it together. and i have two gsr heads.
i've been messing with my friends b20 vtec getting it running right last night i was at the tracks testing it out
i've been messing with my friends b20 vtec getting it running right last night i was at the tracks testing it out
#265
Re: My B18C1 Engine Build/Assembly
Looks good man! You did a lot of work in a short amount of time! LOL
One question though, how do you have your breather tank mounted?? I have mine in a similar spot, but I can't figure out how to mount it over there. Thanks
One question though, how do you have your breather tank mounted?? I have mine in a similar spot, but I can't figure out how to mount it over there. Thanks
#267
#268
No-Traction = Fun
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Location: Follow Me on "InstaGram"
Posts: 2,679
Likes: 0
Received 3 Likes
on
3 Posts
Re: My B18C1 Engine Build/Assembly
I noticed today while putting around my oil light flickers a idle when my oil pressure is around 22-25 psi. Is this normal? My oil pressure is 65-75 when I driving
#270
No-Traction = Fun
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Location: Follow Me on "InstaGram"
Posts: 2,679
Likes: 0
Received 3 Likes
on
3 Posts
Re: My B18C1 Engine Build/Assembly
Nope no loose wire. I think its because im not running the factory ECU, Im running AEM EMS and I think there is a setting in there that needs to be changed.
#273
Honda-Tech Member
Re: My B18C1 Engine Build/Assembly
Your oil pressure is fine and its nothing to do with your ecu. The stock sendor act's as a ground. Either its faulty or theres a bad connection somewhere.
Just think how bad you'd be pulling your hair out now if you didnt have a oil pressure gauge lol.
Just think how bad you'd be pulling your hair out now if you didnt have a oil pressure gauge lol.
#275
Honda-Tech Member
Join Date: Apr 2010
Location: OC, CA
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts