anyone else have some good mounting tips and pics of the precision on the civic

 

here's where mine is mounted...pm mase on exact hardware he used but we just cut the bumper support and used it.

 

get a side veiw of it and the material u used i like that way it looks lot easier and still have some support

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bulldogg83 &raquo;</TD></TR><TR><TD CLASS="quote">what turbo you gonna be running?</TD></TR></TABLE>



Also: I get my intercooler back tomorrow, so I'll have pics of it up by tomorrow night hopefully.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dtmamg &raquo;</TD></TR><TR><TD CLASS="quote">


Also: I get my intercooler back tomorrow, so I'll have pics of it up by tomorrow night hopefully. </TD></TR></TABLE>

I see u go to RIT, I graduated there last year. Ever see a boosted 00 Blue Si around campus?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FredoSP &raquo;</TD></TR><TR><TD CLASS="quote">

I see u go to RIT, I graduated there last year. Ever see a boosted 00 Blue Si around campus? </TD></TR></TABLE>

No I haven't. I'm a first year so that may be why. This year has sucked for Si's at RIT. Three were stolen in the fall, all of them stripped, and one set on fire.

 

Here's another question for my fellow boosted ek brothers...lol

What are you guys doing about your washer resavoir??? I took mine out to run the charge pipe around the end, did anyone find a way to keep it?

I wouldn't mind haveing mine back in, as I want to use it for a water/meth setup..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Alstare &raquo;</TD></TR><TR><TD CLASS="quote">Here's another question for my fellow boosted ek brothers...lol

What are you guys doing about your washer resavoir??? I took mine out to run the charge pipe around the end, did anyone find a way to keep it?

I wouldn't mind haveing mine back in, as I want to use it for a water/meth setup.. </TD></TR></TABLE>

yeah we kept my washer resavoir on there.....we had a bit of a snag yesterday at the shop, but hopefully everything will be done today and I will have some number/more pics.....

http://f1.pg.photos.yahoo.com/...d.jpg

we also test fitted the bumper and we didn't have to cut out the grill.....

 

well is not looking good for the factory fogs on the ek i may just get rid of them and get another bumper it may be more work than needed i can find any ways to do it i know you need to cut bottom bracket but if anyone hase lots of pics pl,ease post them thanks
by the way great thread guys keep it up

 

Back to my question...hehe

Did you guys just run the piping under the washer resavoir???

Thanks..

Bump

 

https://honda-tech.com/zerothread?id=806428

pics of my intercooler and piping on my ek along with dyno sheet

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bulldogg83 &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=806428

pics of my intercooler and piping on my ek along with dyno sheet</TD></TR></TABLE>

does your bumper support 'unbolt off' or do you have to cut it off? the bracket you used for your IC, are those holes from the bumper support??

thanks...looks good bro

I'm hoping to hit those #'s too on my stock B16

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4-banging &raquo;</TD></TR><TR><TD CLASS="quote">

does your bumper support 'unbolt off' or do you have to cut it off? the bracket you used for your IC, are those holes from the bumper support??
</TD></TR></TABLE>

unbolt and yes

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatchling &raquo;</TD></TR><TR><TD CLASS="quote">

unbolt and yes </TD></TR></TABLE>

 

great thread guy keep the pic coming

 

anyone have a good right up on building those brackets cause i need this buy the weekend and espanol is out of them right now and wont have htem for a while so i need a diy please thanks

 

Dammit. I wish I can find my digi cam to show you how I did mine. Will post of my setup soon. It's badass. Simply badass

 

I had someone hold the intercooler in the general location of where I wanted it mounted while I took a bunch of measurements. I used two of the four holes in the bottom support (the outer ones) and marked a spot on the center vertical support. I then had L shaped tabs made and welded on at a friend's machine shop. Fits perfectly. If I was at home I'd get some pictures up.

Horribly crude diagram...
.............................__
......_____________<U>|O|</U>____________
..../----------------------------------------\
._|------------------------------------------|_
|_--------------------------------------------_|
...|______________________________|
...........<U>|O|</U>...........................<U>|O|</U>

 

i would love to see the pics please

 

Here you go. Hope this helps.






Modified by TwoK4drSi at 4:51 AM 3/26/2004

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TwoK4drSi &raquo;</TD></TR><TR><TD CLASS="quote">Here you go. Hope this helps.



</TD></TR></TABLE>

not working

 

You Sure? It works on mine. I also checked it off another computer. Should be working.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TwoK4drSi &raquo;</TD></TR><TR><TD CLASS="quote">You Sure? It works on mine. I also checked it off another computer. Should be working.</TD></TR></TABLE>

only see red Xs

 

i see the pics, it takes a while to load, they are TIF's

Edit: is there any downfall having the IC upside down?

 

I don't think there will be a downfall, just preference per application