mini me boost
Thread Starter
Joined: Aug 2008
Posts: 4
Likes: 0
From: las vegas, nv, 89119
mini me boost
hey guys so im in the process of the mini me swap and i want to go boost but im not too sure about turbos, any suggestions on the best turbo to go with for that swap?? z6 head...d16 block...
HELLO,GOOD MORNIN'
Joined: Sep 2002
Posts: 8,909
Likes: 0
From: Savin lives
Re: mini me boost (ekbaby)
https://honda-tech.com/zerothread/1024174
always check the FAQ we have lots of post about your application
always check the FAQ we have lots of post about your application
Honda-Tech Member
Joined: Dec 2003
Posts: 526
Likes: 1
From: Las Vegas, NV
If the internals of the motor are going to be stock, I would stick with a smaller basic garrett t3/t4 turbo. Perhaps a T3/T4E 50 Trim with a .63 A/R Exhaust housing(with the 4 bolt housing). Its a going to spool quick especially with the smaller displacement of a 1.6L motor and have plenty of room to grow if you want to build the motor later on. It is good about 400-450ish whp.
New medicines
Joined: Jul 2006
Posts: 2,443
Likes: 0
Re: (tony413)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony413 »</TD></TR><TR><TD CLASS="quote">just my opinion but mini-me's = 
</TD></TR></TABLE>
yeah but not everyone wants to deal with a full swap its easier that way, mini me is a good idea for the money as long as the tranny is a good match.
as far as the turbo i would run a smaller one for a better power band, more usable street power.
</TD></TR></TABLE>yeah but not everyone wants to deal with a full swap its easier that way, mini me is a good idea for the money as long as the tranny is a good match.
as far as the turbo i would run a smaller one for a better power band, more usable street power.
Thread Starter
Joined: Aug 2008
Posts: 4
Likes: 0
From: las vegas, nv, 89119
Re: mini me boost (ekbaby)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SynTeg »</TD></TR><TR><TD CLASS="quote">If the internals of the motor are going to be stock, I would stick with a smaller basic garrett t3/t4 turbo. Perhaps a T3/T4E 50 Trim with a .63 A/R Exhaust housing(with the 4 bolt housing). Its a going to spool quick especially with the smaller displacement of a 1.6L motor and have plenty of room to grow if you want to build the motor later on. It is good about 400-450ish whp.</TD></TR></TABLE>
thank you, i really appreciate the suggestion! :]
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony413 »</TD></TR><TR><TD CLASS="quote">just my opinion but mini-me's = </TD></TR></TABLE>
yeah, but i figure it will be a fun and cheap project until i can save up for what i really want, it should be fun for the time being :]
thank you, i really appreciate the suggestion! :]
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony413 »</TD></TR><TR><TD CLASS="quote">just my opinion but mini-me's = </TD></TR></TABLE>
yeah, but i figure it will be a fun and cheap project until i can save up for what i really want, it should be fun for the time being :]
Honda-Tech Member
Joined: Feb 2007
Posts: 3,211
Likes: 0
From: fl, usa
Re: mini me boost (ekbaby)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekbaby »</TD></TR><TR><TD CLASS="quote">
yeah, but i figure it will be a fun and cheap project until i can save up for what i really want, it should be fun for the time being :]</TD></TR></TABLE>
i hear you. im now a proud D-series and B-series owner
yeah, but i figure it will be a fun and cheap project until i can save up for what i really want, it should be fun for the time being :]</TD></TR></TABLE>
i hear you. im now a proud D-series and B-series owner
Thread
Thread Starter
Forum
Replies
Last Post
