Message

We are blessed to be as busy as we are and we are looking to do more if you can believe that.

Kyle (2K_TEG) and Trevor (Integra_T) have been doing an unbelievable job of helping you guys and contacting manufacturers for deals.


We are comtemplating on becoming a bigger distributor of Eagle Products. So please tell us which rods you guys would like to have for us to guage the mix of rods we might buy.

There's still more things to come.


Also, the Hondata buy going great and is a tremendous value, especially for Turbo set-ups where it replaces the Rising Rate Fuel Pressure Regulators.

I've been hard to get a hold off lately, and I apologize. I look forward to talking to all of you but if you can contact Kyle or Trevor for you orders it will free my time to do more educational posts and programing base maps for you Hondata guys etc.

Many thanks to all of you.

H-T Rocks! and my favorite forum is FI even though I am NA at heart.


[Modified by Rocket, 12:31 PM 8/4/2002]

 

Im looking for a set or 5.9067" LS rods. If you can hook it up ill take them. They are not standard length LS rods but Eagle has them.

 

eagle rods?? Already got mine, thanks alot Rocket.



[Modified by c1hatch, 4:33 PM 8/9/2002]

 

That's a freakn long rod dude.

 

you said long rod....haha, hehe

 

LOL Kyle!!!

 

YAY rods too!
whee!
should i just give you guys my credit card and you send me what i will need? lol

 

cheap ones. most of us on here are poor college students

 

does eagle have an application to fit an h23a1?

 

What we have done is sold a custom Ross Piston to allow people to run H22A Eagle rods in H23A and F22b engines for high rpm screamers.

BTW, IMO Ross makes to best pistons I've seen and I've seen all the major brands.

 

cool deal...

so not only will i be sending you money for the clutch next week, but then I need the hondata 2b and now it looks like i'll be doing the pistons and rods also....
for HondaSaver

 

Piston are an excellent deal. I just spoke to one of our customers and he paid $650 for his custom ross pistons. We are selling these for $440 for a limited time.

 

Let me know when that deal for the pistons will end..I'm getting ready to get my clutch from you Thrusday(payday). I need to know how much time I have..Then I would also need to Eagle Rods but I guess those could wait until you do a GB for them

 

don't worry about hitting all our GBs, I think it would be practically impossible to anyways. We have a tight relationship with our customers, and we will go out of our way to help.

 

You should be getting my full payment for 2md clutch TODAY. I need some info on the pistons/rods for the h23a1...I want to go with the custom Ross so that I can run the eagle rods on my h23a1. I just don't know what to ask...I'm oblivious to all this..So what C/R can I run and will they give me a larger displacement? When I get the block resleeved, is there anything special that I would have to tell Vince at GE?

 

No, nothing special.

The longer rod length won't change your displacement it will just make the piston motion smoother and allow your engine to breathe better higher in the rpm range. You'll sacrifice a bit of low end below 4,000 rpms.

You will also be able to run more compression with the longer rods as you don't need to run as much timing.