what's the Max HP u think on a stock Honda rod a B or H motor

i have seen stock Honda motors hold right over 300hp
but its all ways the pistons to go first

but what if u but a forged piston in a stock rod and get the small end bore for full floating wrist pin

do u think it will hold 400hp




[Modified by DLB1994, 6:00 AM 3/31/2002]

 

^

 

the gsr would. the ls rods might not.

the h series will definatly hold at least 350.


[Modified by jinxproof99, 4:38 PM 3/31/2002]

 

I always thought that the stock LS rods were beefier than stock GSR rods? Hmmm....

 

Don't think so....

Suprdave

 

Get one of these....InlinePro


[Modified by On Point EK, 6:07 PM 3/31/2002]

 

A thicker headgasket won't make a rod stronger... You can minimize detonation but 9 times out of 10, detonation will take out a piston before it takes out a rod. 350 bhp is 350 bhp be it a 9:1 motor, or an 11:1 motor. Not a flame, just a clarification... EV.

 

Bring Back Old Topic Because Could Not Find This Info Elsewhere

Really wanting to know if the Stage 2 Revhard will be safe on stock Rods on a B18C1

 

depends on what your power goals are.