rbf351

last night i made a MBC, hooked it up and it doesn't do anything



i hooked the bottom port to the top of the wastegate(tial)
and hooked the side port of the controller to a boost source(blow off valve)

i have it screwed all the way down and the boost still does rise

did i do something wrong?


[Modified by rbf351, 10:46 AM 1/31/2003]

BudaKai

Yeah the pic is the classic Red-X of death. I can call this a repost right? Being we've all seen the Red-X before.

rbf351

wasn't a red x for me

but i change where the pic is hosted, better?

b16ahybrid

try hooking it up to the side port of the tial instead of the top port.

rbf351

so just leave the top port open?

racerxadam

This makes it sound like your trying to lower the boost with a boost controller. The lowest boost you will be able to run is what the wastegate spring is set at.

The bottom port of the controller in the pic should go to the side or lower port on the wastegate and the top port on the wastegate should be left open.

rbf351

then that what i did wrong

i just have to change the hoses