Look at these turbo parts what the hell is this crap!! damn drag..
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Columbia, Beaufort,, SC, USA
Posts: 3,603
Likes: 0
Received 0 Likes
on
0 Posts
Look at these turbo parts what the hell is this crap!! damn drag..
this is my friends parts. look at this manifold it looks like crap. sorry kinda crappy pics but look at the runners i would think that would kill air flow... look at the turbo fin nut... wtf... any input? this isfor H22a4. did anyone elses look this bad? the thing lieaks like crazy... i think the flange needs to be plained..
click here for a link damn pics ar not workin
http://www.angelfire.com/sc/leenash/myinfo.html
[Modified by BoostedH23a1, 8:50 PM 10/8/2002]
click here for a link damn pics ar not workin
http://www.angelfire.com/sc/leenash/myinfo.html
[Modified by BoostedH23a1, 8:50 PM 10/8/2002]
#2
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (BoostedH23a1)
the turbo is normal,thats how they do the balancing,by removing material from either end of the shaft by grinding it down,but that manifold looks like ****,**** poor weldinga dn looks to me like the flange is warped,it probably was not thick enough steel ,what kind of manifold is that?
#4
New User
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (BoostedH23a1)
this is DRAG? I would have expected better quality for what they cost. I guess I dont feel ripped off on my greddy kit now.
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Columbia, Beaufort,, SC, USA
Posts: 3,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (Aeka GSR)
exactly. i think ill get a max rev but they dont have a down pipe i need.. damnit
#7
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (BoostedH23a1)
dude that does look terrible. I'll call DRAG up and see what they can do for you. I'm sure they'd pay to have that manifold back in their possession (spelling?). How much did you pay for that stuff?
Noel
Noel
Trending Topics
#9
Honda-Tech Member
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (BoostedH23a1)
The Angelfire site you are trying to reach has been temporarily suspended due to excessive bandwidth consumption.
The site will be available again in approximately 2 hours!
The site will be available again in approximately 2 hours!
[Modified by xThexHeadx, 3:01 AM 10/9/2002]
#10
Honda-Tech Member
Join Date: Sep 2002
Location: 90210, CA, usa
Posts: 2,720
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (xThexHeadx)
Looks like they used one of those big Arc welders use for building bridges.
#11
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Columbia, Beaufort,, SC, USA
Posts: 3,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (mos)
got it from dave shih or however u spell it. he told me to send it back thats why its off. damn thing only built 4 psi. no wonder look at the gasket!! i dont think its been plained (flat surface where the manifold meets the head)
#13
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (BoostedH23a1)
Thats a DRAG???? damn.. hope you didnt pay too much for that.. looks like shiat! (good thing i didnt go drag.. came close to getting one for my h22a4)
#14
Honda-Tech Member
Thread Starter
Join Date: Jul 2002
Location: Columbia, Beaufort,, SC, USA
Posts: 3,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (LordVtec)
its not mine its my friends. anyone have MAX REV with turbonetics t3/t4 on H series. i see that they use dowpipe flange for garrett t3/t4
#15
Honda-Tech Member
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (BoostedH23a1)
First, that manifold design sucks. Anything that's a log type is a no go in my book.
Second, what crappy construction that one is....I wouldn't even want it for a paperweight! Its only worth is in scrap metal value.
Second, what crappy construction that one is....I wouldn't even want it for a paperweight! Its only worth is in scrap metal value.
#16
Honda-Tech Member
Join Date: Oct 2001
Location: nor cal
Posts: 2,011
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (Marauder)
that's a drag manifold?? looks like nothing like i've seen made from drag... weird..
#17
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (accordfreak)
if thats a drag manifold it must be used and the previous owned tried welding himself. maybe it cracked and he tried to fix it? either way, thats not what drag sells
#20
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (BoostedH23a1)
Are you sure that is a H series DRAG manifold? my brother has an H22A4 and he has a tubular manifold from DRAG that looks nothing like that. His turbo also sit's on top.
My cast iron manifold from DRAG for my B16A2 was not all that great. The ports didn't match for ****. I had them port matched, Ploydine coated it, and called it a day!
My cast iron manifold from DRAG for my B16A2 was not all that great. The ports didn't match for ****. I had them port matched, Ploydine coated it, and called it a day!
#21
Member
Join Date: Dec 2000
Location: official euro R hospital, AUSTRIA
Posts: 4,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (turbo Si)
OMG!!!! That manifold is only worth pound price ... or justmelt it and make some armor out of this metall and shoot Osama
#22
Honda-Tech Member
Re: Look at these turbo parts what the hell is this crap!! damn drag.. (turbo Si)
it is drag, mine is the exact same way... thats why i am going custom in the near future