Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit
#1
WEST COAST
Thread Starter
Join Date: Jan 2003
Location: Sunny Coast, CA
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit
The other day I got another call from a happy customer for the Island State of Hawaii... His first words were O **** O **** lol. Keep In mind this is a 1996 Honda Civic H/B Stock GSR motor stock injectors stock clutch stock everything w/ spark racing turbo kit . He put some rubber bands slicks on and decided he take it to the local track 12.4 firsts pass 12.3 seconds pass. I love hearing this from my customers. I admit my kit is not the easiest kit out their to install but after is done is way worth it. The lowest eta reported to date is 11.7 eta in the quarter mile with a stock gsr motor in a 1995 integra slick done fully stock... Quarter Mile Times range from low 12sec on GSR motor swaps to Low 13sec etas running B16... Just taught I let the true be known.
Kit Consist of the following
Spark Racing 4 into 1 SUS304 Stainless Steel Equal Length Tubular turbo exhaust manifold
Innovative T3/T04E Turbocharger assembly 60 trim / Stage III
Tial Waste gate 35mm (8.7 PSI Spring)
Spark Racing Front Mount intercooler w/ polished cast aluminum end tanks 29x10.5x2.75
BLITZ Super Blow Off Valve
Spark Racing Aluminum Intercooler Charge Piping
Spark Racing Mandrel bent Stainless Steel 2.5" high flow down pipe
Spark Racing waste gate dump tube Stainless Steel
255 gph High pressure/High volume intake fuel pump
Vortech Boost dependent FMU fuel regulator
Intake air filter assembly
Map sensor bypass (Missing Link)
Stainless steel braided oil feed line w/ fittings
Oil return assembly
All necessary hardware and fittings
All necessary hose and T-Bolt clamps
All necessary gaskets
Kit Consist of the following
Spark Racing 4 into 1 SUS304 Stainless Steel Equal Length Tubular turbo exhaust manifold
Innovative T3/T04E Turbocharger assembly 60 trim / Stage III
Tial Waste gate 35mm (8.7 PSI Spring)
Spark Racing Front Mount intercooler w/ polished cast aluminum end tanks 29x10.5x2.75
BLITZ Super Blow Off Valve
Spark Racing Aluminum Intercooler Charge Piping
Spark Racing Mandrel bent Stainless Steel 2.5" high flow down pipe
Spark Racing waste gate dump tube Stainless Steel
255 gph High pressure/High volume intake fuel pump
Vortech Boost dependent FMU fuel regulator
Intake air filter assembly
Map sensor bypass (Missing Link)
Stainless steel braided oil feed line w/ fittings
Oil return assembly
All necessary hardware and fittings
All necessary hose and T-Bolt clamps
All necessary gaskets
#4
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
Send me a kit. I will be sure and run an 11.6
J/K Good times.
J/K Good times.
#5
Honda-Tech Member
Join Date: Nov 2003
Location: T dot, O, Hemp Nation
Posts: 1,625
Likes: 0
Received 2 Likes
on
2 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
good job....he ran slicks on a stock clutch and that thing was able to hold...????
#7
Junior Member
Join Date: Jul 2003
Location: Rochester, NY, usa
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
My spark kit is going on in 2 weeks! I am hoping to hit 12's, but an 11.99 would be nice!
Trending Topics
#8
WEST COAST
Thread Starter
Join Date: Jan 2003
Location: Sunny Coast, CA
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by streetlvlhatch »</TD></TR><TR><TD CLASS="quote">My spark kit is going on in 2 weeks! I am hoping to hit 12's, but an 11.99 would be nice!</TD></TR></TABLE>
Good Luck on you project.. with you built motor you should be in the 11sec club in no time ..
Good Luck on you project.. with you built motor you should be in the 11sec club in no time ..
#9
i HAS questions ?
Join Date: Feb 2003
Location: OH
Posts: 7,850
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
Nice numbers.
Maybe I should've bought one of your kits...then I'd actually have a turbo/manifold/downpipe to put on...*cough* Super-T Motorsports *cough*.
Maybe I should've bought one of your kits...then I'd actually have a turbo/manifold/downpipe to put on...*cough* Super-T Motorsports *cough*.
#10
Honda-Tech Member
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SPARK RACING INC. »</TD></TR><TR><TD CLASS="quote">The other day I got another call from a happy customer for the Island State of Hawaii... His first words were O **** O **** lol. Keep In mind this is a 1996 Honda Civic H/B Stock GSR motor stock injectors stock clutch stock everything w/ spark racing turbo kit . He put some rubber bands slicks on and decided he take it to the local track 12.4 firsts pass 12.3 seconds pass. I love hearing this from my customers. I admit my kit is not the easiest kit out their to install but after is done is way worth it. The lowest eta reported to date is 11.7 eta in the quarter mile with a stock gsr motor in a 1995 integra slick done fully stock... Quarter Mile Times range from low 12sec on GSR motor swaps to Low 13sec etas running B16... Just taught I let the true be known.
Kit Consist of the following
Spark Racing 4 into 1 SUS304 Stainless Steel Equal Length Tubular turbo exhaust manifold
Innovative T3/T04E Turbocharger assembly 60 trim / Stage III
Tial Waste gate 35mm (8.7 PSI Spring)
Spark Racing Front Mount intercooler w/ polished cast aluminum end tanks 29x10.5x2.75
BLITZ Super Blow Off Valve
Spark Racing Aluminum Intercooler Charge Piping
Spark Racing Mandrel bent Stainless Steel 2.5" high flow down pipe
Spark Racing waste gate dump tube Stainless Steel
255 gph High pressure/High volume intake fuel pump
Vortech Boost dependent FMU fuel regulator
Intake air filter assembly
Map sensor bypass (Missing Link)
Stainless steel braided oil feed line w/ fittings
Oil return assembly
All necessary hardware and fittings
All necessary hose and T-Bolt clamps
All necessary gaskets
</TD></TR></TABLE>
Nice write-up!
Kit Consist of the following
Spark Racing 4 into 1 SUS304 Stainless Steel Equal Length Tubular turbo exhaust manifold
Innovative T3/T04E Turbocharger assembly 60 trim / Stage III
Tial Waste gate 35mm (8.7 PSI Spring)
Spark Racing Front Mount intercooler w/ polished cast aluminum end tanks 29x10.5x2.75
BLITZ Super Blow Off Valve
Spark Racing Aluminum Intercooler Charge Piping
Spark Racing Mandrel bent Stainless Steel 2.5" high flow down pipe
Spark Racing waste gate dump tube Stainless Steel
255 gph High pressure/High volume intake fuel pump
Vortech Boost dependent FMU fuel regulator
Intake air filter assembly
Map sensor bypass (Missing Link)
Stainless steel braided oil feed line w/ fittings
Oil return assembly
All necessary hardware and fittings
All necessary hose and T-Bolt clamps
All necessary gaskets
</TD></TR></TABLE>
Nice write-up!
#11
WEST COAST
Thread Starter
Join Date: Jan 2003
Location: Sunny Coast, CA
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">
Nice write-up! </TD></TR></TABLE>
Thank you its not much of a write up its more of a reporting in things .. good luck in your projects
Nice write-up! </TD></TR></TABLE>
Thank you its not much of a write up its more of a reporting in things .. good luck in your projects
#14
WEST COAST
Thread Starter
Join Date: Jan 2003
Location: Sunny Coast, CA
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by u2civic1 »</TD></TR><TR><TD CLASS="quote">so is that untuned?
wonder what he would get if he got it tuned</TD></TR></TABLE>
YES THAT WAS JUST BOLT ON PERFERMANCE
wonder what he would get if he got it tuned</TD></TR></TABLE>
YES THAT WAS JUST BOLT ON PERFERMANCE
#15
WEST COAST
Thread Starter
Join Date: Jan 2003
Location: Sunny Coast, CA
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -iLLuZioN-B18C1 »</TD></TR><TR><TD CLASS="quote">his clutch should be toast soon enough</TD></TR></TABLE>
Yeah he said his clutch was slipping on the High End
Yeah he said his clutch was slipping on the High End
#16
D Tranny Guru
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
obviously good results, my only issue would be fuel.........
you have to be pushing the stockers WAY past max!!!!!!!!
you have to be pushing the stockers WAY past max!!!!!!!!
#17
Honda-Tech Member
Join Date: Apr 2002
Location: North of Boston, MA, USA
Posts: 2,349
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
and the fuel pressure must be crazy high - 8.7*12 = 104.4 + base (~36 psi) is 140 psi of fuel pressure, can your intank pump supply that?
#18
Honda-Tech Member
Join Date: Mar 2002
Location: Markham, Ontario, Canada
Posts: 1,180
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
You will be getting a email from me aswell within the next month. Just mocking up the motor right now but I am looking for 400-500whp.
This is my heavily braced Sparks Racing mani with a Tial wastegate and SC61 turbo. I have a point to prove with this manifold. As simple as these 3 parts look, it took me almost a hour to put them together and clock the turbo.
This is my heavily braced Sparks Racing mani with a Tial wastegate and SC61 turbo. I have a point to prove with this manifold. As simple as these 3 parts look, it took me almost a hour to put them together and clock the turbo.
#23
Honda-Tech Member
Join Date: Aug 2003
Location: Canada
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Casey »</TD></TR><TR><TD CLASS="quote">i didnt know advertisement were allowed in this forum</TD></TR></TABLE>
He's not advertising. He's simply telling us about a turbo kit he installed in a consumers car and told us what the result was.
I dont see anything wrong with that.
He's not advertising. He's simply telling us about a turbo kit he installed in a consumers car and told us what the result was.
I dont see anything wrong with that.
#24
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
he is not advertising imo, there is no price or deal being pushed on us... just saying what their off the shelf kit did performance wise, per the customer.
#25
WEST COAST
Thread Starter
Join Date: Jan 2003
Location: Sunny Coast, CA
Posts: 2,908
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just got a call from a Happy customer ... 12.3 1/4 stock gsr with Spark Racing Turbo Kit (SPARK
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twkdCD595 »</TD></TR><TR><TD CLASS="quote">he is not advertising imo, there is no price or deal being pushed on us... just saying what their off the shelf kit did performance wise, per the customer.</TD></TR></TABLE>
Exactly
Exactly