Internal waste gate testing question
09-08-2014, 05:09 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Location: fresno, ca, usa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Internal waste gate testing question
Went to tune and couldn't get boost over 4psi, boost leaked and found no leaks, tested the waste gate actuator and couldn't get it to hold pressure,it would open, and then close immediately and hold no pressure, I've looked online to test it and seems that it should hold pressure and stay open until I release the pressure?
Noob question I know, don't flame me too hard..
Thanks in advance!
Noob question I know, don't flame me too hard..
Thanks in advance!
09-08-2014, 05:27 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Location: fresno, ca, usa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
09-08-2014, 05:28 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2008
Location: fresno, ca, usa
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post