Intercooler Question
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Columbia, SC, USA
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler Question
Alright I found an Intercooler Kit for a Civic and I ahve a 98 Integra and I was wondering if this intercooler would mount up without any problems? Here are the deminsions:Bar & Plate XXL fromt mount intercooler.
All TIG Welded 6061 Aluminum.
1300 CFM flow rate,510 HP efficient.
2.5." inlet & outlet. High flow. Core Size : 22"x 5"x 3", Over L: 28"x 5"x 3".
Aluminum shiny with chrome finished.
Pipe Thickness: 1/16 in. (1.58 mm)
The Kit Offers up to 45% increase flow compared to standard bent piping
All TIG Welded 6061 Aluminum.
1300 CFM flow rate,510 HP efficient.
2.5." inlet & outlet. High flow. Core Size : 22"x 5"x 3", Over L: 28"x 5"x 3".
Aluminum shiny with chrome finished.
Pipe Thickness: 1/16 in. (1.58 mm)
The Kit Offers up to 45% increase flow compared to standard bent piping
#2
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: Intercooler Question (Bonestock98GS)
i think thats kinda small for the 510 claim. but with a little massaging, it should fot your teg. may have to add a little section of pipe or a coupler here or there.
Thread
Thread Starter
Forum
Replies
Last Post
AlphaCivic
Honda Civic / Del Sol (1992 - 2000)
14
04-03-2004 09:05 AM